Posts made by Weasel
-
RE: GPU plot generator v4.1.1 (Win/Linux)posted in Plotter
Trying to find optimal parameters for my GTX 1060 6gb card:
Using Windows 7 x64, 8gb RAM, HexaCore AMD Phenom II X6 1055T, 2800 MHz (14 x 200)
MSI gtx 1060 6gb (default values for core and mem), Geoforce Game Ready driver 382.53Config gives me following recommended parameters:
1 0 6144 768 8192
But it never started, driver crashes, out of resources errors.For me, the solutiong was in halving parameters in devices.txt
Started with this: 1 0 6144 768 8192
Now its: 1 0 1536 192 4096It works now in "direct" mode with my GTX1060 6gb.
But the speed at start was 40 000 - 30 000 nonces per minute
and dropped to 11 000GPU TDP jumping from 5% to 41%
Temperature of GPU chip rised to 67CTried this ones 1 0 2048 256 4096 - worked for 5 mins and driver crashes again.
If i can help to someone with my hardware, to find a solution or optimised numbers PM me -
RE: Need help - GPU plottingposted in Mining & Plotting
@mr.x thank you Mr.X! It really helped me.
Ofcourse will share my exp there. -
RE: Need help - GPU plottingposted in Mining & Plotting
Found a solution - Troubleshooting for all errors could be found here https://github.com/bhamon/gpuPlotGenerator
For me, the solutiong was in halving parameters in devices.txt
Started with this 1 0 6144 768 8192
1 0 1536 192 4096It works now in "direct" mode with my GTX1060 6gb.
But the speed at start was 30 000 nonces per minute
and dropped to 11 000 per minuteGPU TDP jumping from 15% to 41%
Temperature of GPU chip rised to 67CSo i think these parameters should be optimised in some way
1 0 1536 192 4096 -
RE: Need help - GPU plottingposted in Mining & Plotting
In buffer mode its crushes my video driver, forces it to restart
APPCRASH
gpuPlotGenerator.exe
nvopencl.dll
6.14.13.8253

-
Need help - GPU plottingposted in Mining & Plotting
Hello there burst lovers :)
Finally got my 1060 6GB card. Started plotting using this manual:
https://www.burstnation.com/wbb/index.php?thread/437-how-to-use-gpu-plotter-and-how-to-optimize-plots/Start.bat contains this:
gpuPlotGenerator generate direct h:\1948904431442773042_700000000_14868480_8192
14868480 - number of nonces for 3630GbAnd it gaves me an error: ERROR -5 CL_OUT_OF_RESOURCES. Error in step 2 kernel launch

Any clues guys, what am i doing wrong?
-
RE: Ответы на вопросы на родном языке :)posted in Русский
@Raven плот подключить, не завершая процесс, практически можно, но будут постоянные ошибки и 0 результата. Остановив процесс и продолжить, также нельзя.
Можно делать плоты меньшего размера, например. -
RE: Ответы на вопросы на родном языке :)posted in Русский
@tvv8 ошибки вроде твоих - говорят о том, что либо у тебя с интернетом проблемы, либо могут быть у пула (ddos, неполадки по дороге, с прокси и т.д. и т.п.). В любом случае, если исчезли и network quality 100, то всё норм. Иногда полезно смотреть сайт самого poolа, там бывает информация о неполадках/новости.
P.S> ребят, не стесняйтесь - ставьте плюсики в ответах, смогу быстрее отвечать. -
RE: Ответы на вопросы на родном языке :)posted in Русский
Задай размер плота - 1Гб и запусти на процессоре, потом ни видеокарте. Только когда на видеокарте запустишь, оно "как бы" зависнет, дождись и посмотри сколько заняло времени. На 5шт. видеокартах - честно не знаю, возможно ли распараллелить, запустив плоттинг в несколько потоков с твоей конфигурацией, пробуй.
-
RE: Ответы на вопросы на родном языке :)posted in Русский
@Cody оптимально быстро, зависит напрямую от железа, либо через CPU, либо через видео карту, какая у вас конфигурация?
-
RE: Ответы на вопросы на родном языке :)posted in Русский
@tvv8 судя по снимку, у тебя проблемы с подключением, интернет проверь свой
-
RE: Ответы на вопросы на родном языке :)posted in Русский
@datenrettung зачем усложнять, 120Тб тебе и так дадут на burst.ninja или на ccminer, или в соло майнинге отличные дедлайны и блоки ежедневно. Люди работаю через USB 2.0.
-
RE: Ответы на вопросы на родном языке :)posted in Русский
@Nezumi вот такой есть листик https://docs.google.com/spreadsheets/d/1KHu9BWwy_QXIYAx2m_Tzs9BqPoTYUDhEDbHihZEXGsE/edit#gid=1895303028
Правда актуальность его под вопросом. Чем меньшие deadline ты находишь на пуле - тем больше вероятность, что ты сможешь обработать блок (сразу большая сумма), если блоки не находишь, получаешь % от найденных блоков другими. Который зависит от объема твоих плотов и опять же, меньшего deadline.С 1Тб, есть пул, для мобильных устройств, там жесткое ограничение до 1Тб
-
RE: Ответы на вопросы на родном языке :)posted in Русский
@Nezumi какой пул конкретно? Что значит без ограничений по дедлайнам? Дедлайн основной параметр, чем он меньше на конкретном пуле с твоим объемом, тем больше вероятность получить блок.
-
RE: can i mine with this thing?posted in Mining & Plotting
@manfromafar usually they dont support more > 2Tb, depends on controller and MB - plus is very important type of logical disk sector size - for old MB and adapters its 512Kb, but most sata hdds with 4Tb and more - have 4k sector size
-
RE: can i mine with this thing?posted in Mining & Plotting
You can check mining speeds here https://docs.google.com/spreadsheets/d/1ADgEidGEDrVNRt024pFztLfMGM2tZzIfYjB5y5PBxWg
About this server - what disks you want to plot - internal, or USB, what volume?
Best solution is to plot with GPU or Xeon 2660-80, they are really cheap, complete system will worth about 400 usd. With around 20 000 nonces. -
RE: Using Blago v1.170601 - red lines "Discarded" + Fast blockposted in Help & Support
Thank you for a clues. Im using AMD CPU with Win7, so the best choice is Blago's miner.
I think that "discarded" is something new, from new version. Only @Blago probably can help here. -
Using Blago v1.170601 - red lines "Discarded" + Fast blockposted in Help & Support
Hi everyone, started using today a new version of Blago Miner v1.170601.
With burstpool.ddns.net and start getting such messages:

What does it mean, can anyone explain please?
- Discarded
- Fast block or corrupted file?
Using this conf file:
{
"Mode" : "pool",
"Server" : "burstpool.ddns.net",
"Port" : 8124,"UpdaterAddr" : "burstpool.ddns.net",
"UpdaterPort" : 8124,"InfoAddr" : "burstpool.ddns.net",
"InfoPort" : 8124,"EnableProxy" : false,
"ProxyPort" : 8126,"Paths":
[
"I:\Burst\plots","G:\Burst\plots","F:\Burst\plots","E:\Burst\plots"
],
"CacheSize" : 100000,
"ShowMsg" : false,
"ShowUpdates" : false,"Debug" : true,
"SendBestOnly" : true,
"TargetDeadline": 2592000,"UseFastRcv" : false,
"SendInterval" : 100,
"UpdateInterval" : 950,"UseLog" : true,
"ShowWinner" : false,
"UseBoost" : false,"WinSizeX" : 80,
"WinSizeY" : 60
}Thanks!
-
RE: Ответы на вопросы на родном языке :)posted in Русский
@Angilena01 вечер добрый! Вы такая активная и живая, поражаюсь просто. Вы откуда? Откуда такое желание неутолимое срубить денег?:)
Если из Москвы, подключайтесь, мы поможем, подскажем и пригреем. Blago - самый достойный представитель нашего community, по признаку - пользы. Оставьте немного его и для других ;-)
