OMG what a pleb! It's because the pool url did not include http://
Posts made by RiskyFire
-
RE: Jminer Unable to get mining info from wallet invalid protocolposted in Mining & Plotting
-
Jminer Unable to get mining info from wallet invalid protocolposted in Mining & Plotting
Hi,
Since yesterday I having this new issue when trying to connect Jminer to a pool.
"unable to get mining info from wallet invalid protocol" ...pool addressI've tried it with three different pools and got the same issue, it has been working fine with burst.ninja until the pool went awol.
Any ideas?
-
Video Guide: How To Use The Burstcoin Asset Exchangeposted in HowTo's & Tutorials
A video showing how to get started with the Burstcoin Asset Exchange. I'll show you how to buy, sell and trade your first Burstcoin assets and where to find them.
-
RE: Slow Wallet Node and Sync Issueposted in Help & Support
I switched to 1.2.8 but I'm getting the same problem. It appears to be due to the blockchain file.
I'm going to re-sync the node from scratch and see how it goes. It's started and is downloading at least.
-
RE: Slow Wallet Node and Sync Issueposted in Help & Support
@luxe said in Slow Wallet Node and Sync Issue:
java -version
Microsoft Windows [Version 6.3.9600] (c) 2013 Microsoft Corporation. All rights reserved. C:\Users\Username>java -version java version "1.8.0_111" Java(TM) SE Runtime Environment (build 1.8.0_111-b14) Java HotSpot(TM) 64-Bit Server VM (build 25.111-b14, mixed mode)The machine has a A10 7700K, and runs well. But Burst doesn't seem to put any load on the cpu or memory.
I'll check the Win10 java version. What version are you all running?
My Win10 machine is running the same version of java
Microsoft Windows [Version 10.0.14393] (c) 2016 Microsoft Corporation. All rights reserved. C:\Users\Lee>java -version java version "1.8.0_111" Java(TM) SE Runtime Environment (build 1.8.0_111-b14) Java HotSpot(TM) 64-Bit Server VM (build 25.111-b14, mixed mode) -
Slow Wallet Node and Sync Issueposted in Help & Support
I have a problem with the Burst wallet node on one of my machines and I'm struggling to get it resolved.
The Burst wallet was running fine until last week, when it would no longer sync up.
I've deleted everything, and done a new install of Burst 1.2.7 with a fresh folder and download the full blockchain file and put in correct folder.
The Burst node is very slow to open it starts in 1230 seconds, and fails to stay sync'd and I copied a sync'd folder from another machine and within a few hours the node was 50 blocks behind.
I think it could be the Java version causing the issue but I use the same on another machine I think Jre8. This machine is Win.8.1 and everything the same works on my Win10 machine.
Any ideas? It's like a caching issue or something.
-
RE: Burst.ninja is getting too bigposted in General Discussion
Hi Everyone,
I've been solo mining for a while but had serious problems syncing my wallet on Tuesday. I jumped on Burst.Ninja whilst I worked on getting the issue sorted. I'll be going back to solo Monday.
-
RE: ByteEMini - Asset updatesposted in Asset Exchange
Dividends have been paid. Thankyou.
Amount paid, Account, TX 247.2713312, BURST-PMVC-387U-LG6C-FUMVY, 11820307864027591379 136.27012207, BURST-XC7A-FM25-3TK9-CNPGC, 15364759569783339790 41.24882449, BURST-54J2-DUDF-EUQU-4ZZRQ, 5951914676125382613 21.21853112, BURST-53DP-A7CT-YTM9-FZCLM, 2105575418893273451 14.61721033, BURST-7G43-CTSC-QLTM-GASD4, 3179332684238949638 8.25165099, BURST-B2R8-TZKJ-T4NG-4AJBW, 5575321123349989327 2.35761457, BURST-78S3-3AXW-SDDG-37Y72, 7865072820543370356 0.00471523, BURST-GGPX-PP5S-LAGP-CBGCU, 16818712566149685867 ------------All transactions processed------------Hello,
Important update regarding this asset which I have maintained for over almost two years. I don't have time to put into the payments of dividends and the original idea was that this asset was a mini version of the ByteEnt asset at a ratio of 100/1.
Not much trading takes place and the asset holders are pretty much constant holders so I've decided to swap over the ByteEMini assets for the actual ByteEnt asset on the same basis they were purchased 100/1.No more dividends will be paid by this asset. Asset holders need to transfer their ByteEMini assets to BURST-N8KB-DKKW-9C4W-AF289 where they will be exchanged for ByteEnt assets at a ratio of 100/1. If you don't have a round number transfer what you have and I'll round up your amount so you get the correct number of ByteEnt.
Thankyou.
-
ByteEMini - Important Update! Share Swapposted in Asset Exchange
Hello,
Important update regarding this asset which I have maintained for over almost two years. I don't have time to put into the payments of dividends and the original idea was that this asset was a mini version of the ByteEnt asset at a ratio of 100/1.
Not much trading takes place and the asset holders are pretty much constant holders so I've decided to swap over the ByteEMini assets for the actual ByteEnt asset on the same basis they were purchased 100/1.No more dividends will be paid by this asset. Asset holders need to transfer their ByteEMini assets to BURST-N8KB-DKKW-9C4W-AF289 where they will be exchanged for ByteEnt assets at a ratio of 100/1. If you don't have a round number transfer what you have and I'll round up your amount so you get the correct number of ByteEnt.
Thankyou.
-
RE: QORA asset - NOT ME - I don't know what kind of game this is, but don't purchase this assetposted in Asset Scams
I started receiving dividends from this a few days ago, I just thought it was a mistake. But after checking my account I have 25,500 of this asset. Also seems I've received some TEKTONIKE too.
-
RE: Shingled magnetic recording (SMR)posted in General Discussion
I had one of those 8TB Seagate Expansion drives and it failed after just a few days. I guess those drives are just terrible quality. I've had no problems with the 4TB / 5TB Seagate's.
-
RE: Just mined my 666th Burstcoin block!posted in Mining & Plotting
@sevencardz Cool, thanks for watching.
-
RE: Just mined my 666th Burstcoin block!posted in Mining & Plotting
@ZapbuzZ Per Drive? My 5TB drives have a plot size of 19,060,000
A little over 63TB in total for all my drives. -
Just mined my 666th Burstcoin block!posted in Mining & Plotting
Just sharing my progress and support for Burst. Loving the project and will continue to mine on. Happy to help if you have any questions.
-
RE: ByteEMini - Asset updatesposted in Asset Exchange
Dividends have been paid. Thankyou.
Amount paid, Account, TX 282.65699, BURST-PMVC-387U-LG6C-FUMVY, 5093745717005940440 155.771, BURST-XC7A-FM25-3TK9-CNPGC, 5924849658922848693 47.15172, BURST-54J2-DUDF-EUQU-4ZZRQ, 7630963879658227037 24.255, BURST-53DP-A7CT-YTM9-FZCLM, 3097988562226771087 16.709, BURST-7G43-CTSC-QLTM-GASD4, 16530557258470874640 9.4325, BURST-B2R8-TZKJ-T4NG-4AJBW, 1959894970576071430 2.695, BURST-78S3-3AXW-SDDG-37Y72, 1793171667880321425 0.3234, BURST-NSNB-64B4-5XNU-DKTZD, 3142362314685836651 0.00539, BURST-GGPX-PP5S-LAGP-CBGCU, 1433363264562116375 ------------All transactions processed------------ -
RE: Burst Casino Assetposted in Closed Assets - Don't buy
@Zeus Wow! Awesome work, you're doing a great job. Thankyou.
-
RE: Forum, Faucet and Burstcoin.Biz advertising auction.posted in Announcements
Ok, here are my bids. Any reserve or other bids?
Forums Sidebar: RiskyFire @ 10,000
Forums Footer: RiskyFire @ 5,000 -
RE: Forum, Faucet and Burstcoin.Biz advertising auction.posted in Announcements
When will the next auction start please? every two weeks is it?
-
RE: XPlotter for optimized plots (CPU)posted in Plotter
@Blago Great work, can wait to test it. I assume the writing performance would be about the same as wplotgenerator ?
-
RE: Videos: Step by Step Video Guides How to Mine Burstcoinsposted in Mining & Plotting
@daWallet Awesome, I'll get a video done on that. It would be really useful.
