It seems like there are is other solution but to install the software and I tried using my laptop with the latest burst client for windows AIO.
After updating the java and triggered the mining process, pool.burst-team.us didn't work for me as I'm still seeing the same error. But when I switched to burstpool.ddns.net, the mining process worked..
But now I see the error ("requestProcessingTime":1,result":Passphrase does not match reward recipient").
What should I do next?
Hi,
I've got 2 NAS, a 4 bay and 5 bay that I've been mining. Unfortunately, the 4 bay NAS crashed and I had to rebuild from scratch. But after writing the plots on that, the mining just didn't work and I couldn't mine anything.
I proceed to update my burst client for win (v0.3.1) to the latest AIO version. However, when I ran the latest burst client version, i'm unable to connect to the Online wallet, saying that i'm unable to connect to https://wallet.burst-team.us. I've tried connecting via a web browser and it works fine.
But now when I switch back to my burst client (v0.3.1) as the latest version was installed on a different folder, it showed this
WHere should i start to trouble shoot?
appreciate the help in advance.
Now I've 3 folders and I've tried running all the miner-vxxx,exe, miner-vxxx_AVX.exe and miner-vxxx_AVX2.exe on all 3 folders and they are giving me the same error. :(
what else should I do next?
The miner conf that was initially shown (according to the screen shot) was for miner-burst-1.160705 and it's showing the correct path.
I've updated the same path for both miner.conf and they are still showing the same error.
Tried downloading the latest blago miner and updating the miner.conf file and it's still showing the same error.. not sure to resolve the path issue (if that's the problem)
I've attached screenshot of my 3 different locations of my plots
@iKnow0
The highlighted folders are where the miner.conf is found. The content of the miner.conf provide earlier was located miner-burst-1.160705.
Here's the content of the miner.conf located under miner-burst-1.160610 but the path is incorrect.
{
"Mode" : "pool",
"Server" : "pool.burst-team.us",
"Port" : 8124,
"UpdaterAddr" : "pool.burst-team.us",
"UpdaterPort" : 8124,
"InfoAddr" : "pool.burst-team.us",
"InfoPort" : 8124,
"EnableProxy" : false,
"ProxyPort" : 8126,
"Paths":
[
"E:\Burst\plots","C:\Burst\plots"
],
"CacheSize" : 100000,
"ShowMsg" : false,
"ShowUpdates" : false,
"Debug" : true,
"SendBestOnly" : true,
"TargetDeadline": 4000000,
"UseFastRcv" : false,
"SendInterval" : 100,
"UpdateInterval" : 950,
"UseLog" : true,
"ShowWinner" : true,
"UseBoost" : false,
"WinSizeX" : 80,
"WinSizeY" : 60
}
@iKnow0 any instructions for a proper upgrade to use blago miner?
I did a check and found that there are 2 miner.conf and the path looks ok.
Here's the conf file
{
"Mode" : "pool",
"Server" : "pool.burst-team.us",
"Port" : 8124,
"UpdaterAddr" : "pool.burst-team.us",
"UpdaterPort" : 8124,
"InfoAddr" : "pool.burst-team.us",
"InfoPort" : 8124,
"EnableProxy" : false,
"ProxyPort" : 8126,
"Paths":
[
"W:\Burst\plots","U:\Burst\plots","C:\Burst\plots"
],
"CacheSize" : 100000,
"ShowMsg" : false,
"ShowUpdates" : false,
"Debug" : true,
"SendBestOnly" : true,
"TargetDeadline": 4000000,
"UseFastRcv" : false,
"SendInterval" : 100,
"UpdateInterval" : 950,
"UseLog" : true,
"ShowWinner" : false,
"UseBoost" : false,
"WinSizeX" : 80,
"WinSizeY" : 60
}
I realized after the update of Burst Client for win v0.3.9.6, i'm still able to access v0.3.1 but now both client version would show the same result when I try to mine.
Any advice?
Hi,
I've got 2 NAS, a 4 bay and 5 bay that I've been mining. Unfortunately, the 4 bay NAS crashed and I had to rebuild from scratch. But after writing the plots on that, the mining just didn't work and I couldn't mine anything.
I proceed to update my burst client for win (v0.3.1) to the latest AIO version. However, when I ran the latest burst client version, i'm unable to connect to the Online wallet, saying that i'm unable to connect to https://wallet.burst-team.us. I've tried connecting via a web browser and it works fine.
But now when I switch back to my burst client (v0.3.1) as the latest version was installed on a different folder, it showed this 
and doesn't proceed further
what should I do next?
appreciate the help in advance. thanks!
Thanks @haitch. Where can i edit the full path to the directory and where should i copy the plots directory from?
I've tried plotting on my Drive C: and it works fine.. but I'm clueless how to edit the full path and to copy the plots directory.
Can shed some light for this noob?
Hi, I've just gotten a NAS (some kind soul) and added 4 HDD (1x 3TB and 3x 2TB). I've created 2 partition on it whereby i allocated 1TB for my media files and the balance for Burst mining. But when I'm atttempting to write plot on the 7TB shared folder (mapped as X:) it showed me this error.
I'm just starting on burst mining and not sure what can i do about this error.
Appreciate all the help and thanks in advance.!