Posts made by jhip626

@tross said in http://burstpool.ddns.net move to Cloudflare!:

Yahoo tross pool is getting ddosed before he changes and I thought they forgot about me how sweat!

its nice to know people are thinking of you, isn't it?

@tross said in http://burstpool.ddns.net move to Cloudflare!:

On Friday at 9am CET (Central European Time Berlin) tross pool will move under the protection of Cloudflare.
I hate changes but after losing 200+ miners something has to be done.

Mining address: burstpool.ddns.net
Port: 8080 <<<<<<only thing to change
Recipient: BURST-JGBV-U7YK-SWHM-4P4QS

All you need to do at 9am Friday is change mining ports!

CHANGE 30 JUNE 2017 at 9AM CET (CENTRAL EUROPEAN TIME BERLIN

all test pool miners change reward assignment before then!

I really hope this gives us some breathing room from attackers!

note: After the change if you are going to post here how my ip can be found out. First try to find it and pm me so I can say its wrong!

So burstpool.site wont work anymore? I have to change my miner addy again?

@tross said in tross Burstcoin Pool:

Maybe theres an issue with avx?

which miner are you using? link?

@tross
and this is what my miner looks like

@tross said in tross Burstcoin Pool:

@jhip626 just reward assignment

to the BURST-TK7P-PVWE-K2AC-45LZD right?
i did already

@tross do i need to change something else?

@tross said in tross Burstcoin Pool:

@jhip626 did you wait for 4 confirms. Are you using a stand alone miner?

{
"Mode" : "pool",
"Server" : "burstpool.site",
"Port": 8080,

"UpdaterAddr" : "burstpool.site",
"UpdaterPort": "8080",

"InfoAddr" : "burstpool.site",
"InfoPort": "8080",

"EnableProxy": false,
"ProxyPort": 8126,

"Paths":
[
"M:\Burst\plots","K:\Burst\plots","J:\Burst\plots","H:\Burst\plots","G:\Burst\plots","E:\Burst\plots","D:\Burst\plots"
],
"CacheSize" : 100000,
"ShowMsg" : false,
"ShowUpdates" : false,

"Debug": true,
"UseHDDWakeUp": true,

"SendBestOnly": true,
"TargetDeadline": 2592000,

"UseFastRcv" : false,
"SendInterval": 100,
"UpdateInterval": 950,

"UseLog" : false,
"ShowWinner" : false,
"UseBoost" : true,

"WinSizeX": 76,
"WinSizeY": 60
}

my miner conf looks like this

mine looks like this

{
"Mode" : "pool",
"Server" : "burstpool.site",
"Port" : 8080,

"UpdaterAddr" : "burstpool.site",
"UpdaterPort" : 8080,

"InfoAddr" : "burstpool.site",
"InfoPort" : 8080,

"EnableProxy" : false,
"ProxyPort" : 8126,

"Paths":
[
"O:\Burst\plots","M:\Burst\plots","G:\Burst\plots","E:\Burst\plots","D:\Burst\plots","C:\Burst\plots"
],
"CacheSize" : 100000,
"ShowMsg" : false,
"ShowUpdates" : false,

"Debug" : true,

"SendBestOnly" : true,
"TargetDeadline": 6048000,

"UseFastRcv" : false,
"SendInterval" : 100,
"UpdateInterval" : 950,

"UseLog" : true,
"ShowWinner" : false,
"UseBoost" : false,

"WinSizeX" : 80,
"WinSizeY" : 60
}

@tross i went into the pool, but my miner is just blank.... does that make sense?

@tross said in tross Burstcoin Pool:

BURST-TK7P-PVWE-K2AC-45LZD

im gonna need an idiots guide on how to do this change when it is official

@jmeek82z28 said in Claymore-Dual Miner problems:

@jhip626

what are the cards on the rig? remember "Dual mine" is .. mine Eth near full capacity and slip an alternate algorithm on the card to use spare cycles. ex. My 4x470 rig should do around 100Mhash/s and can tack on about 1300Mhash in SiaCoin. Sia alone i'm able to produce around 3800. There's flags you can set to choose each coin's "intensity" and algorithm, but its Ether first on Claymore.

A geforce gtx 1050 ti

@jmeek82z28 said in Claymore-Dual Miner problems:

@falconCoin

below is my claymore config.txt, running on ethOS. Stuff in bold is all you need to dual Eth (or music/ETC/ dagger hashi alg coin) and SiaCoin

-dbg 1
-logfile $HOME/claymore.log
-epool eth-eu1.nanopool.org:9999
-ewal <eth wallet id>
-epsw x
-eworker rig1
-powlim -22

-dpool sia-us-east1.nanopool.org:7777
-dwal <siacoin wallet id>
-dcoin sia
-dcri 16

i pretty much copied what you had exactly, and im finially showing a hashrate, but its slow as hell onw is about 10 mhs and the other is about 100 mhs... where if i mine just siacoin i would get 600mhs

@haitch said in Claymore-Dual Miner problems:

@falconCoin I gave up chasing the coin of the day, and pointed my cards at NiceHash, earning are definitely respectable

i hear so much bad stuff about nicehash and how they steal hashrate and etc..

@Yey_09 thats what im getting now, when i try to just mine eth by itself. no hashrate

cant i just run ether and siacoin in seperate miners and it do the same thing?

@HiDevin said in Claymore-Dual Miner problems:

idk man, have you tried mining only eth instead?

nope, dont even know how

geforce gtx 1050 ti @HiDevin

@HiDevin said in Claymore-Dual Miner problems:

@jhip626 what is your card, lol my card has 4gb of vram, because you know

rx 480 4gb

oh, yea the card is a 4 gig

@HiDevin said in Claymore-Dual Miner problems:

@jhip626 how much vram do you have in ur gpu if u have a 2gb I think u are going to have trouble.

i dont know, how do i check that and adjust it?

EthDcrMiner64.exe -epool stratum+tcp://us1.ethpool.org:3333 -ewal 0xC8404efa9f0F4bbcb9C064795Ac7d5e15BF0FD19.jhip626 -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal 35324be22602be9a020387a97de4d570f45c0dc0f22c4df2cbcfe4da327468f5656c15584cca -dpsw x

thats my setup, no idea what im doing wrong