@Blago Mine will run with the different drives with this miner. I'm wondering if the different hard drive configurations will change on the back end mining. On mine, it seems the small drives have more found/sent DL's than the larger drivers. Not sure if it is coincidental or something is going on??
D
Posts made by dcozzi
-
RE: Mining Using Multiple Types of External Hard Drivesposted in Mining & Plotting
-
RE: Mining Using Multiple Types of External Hard Drivesposted in Mining & Plotting
@rnahlawi I am using the one with Burst Client....miner-v1.160705.
-
RE: Mining Using Multiple Types of External Hard Drivesposted in Mining & Plotting
@rnahlawi Thanks for your response. Your answer could be a separate topic because I know there are others who could be asking the same question about optimizing.
Any idea on the multiple drives?
-
Mining Using Multiple Types of External Hard Drivesposted in Mining & Plotting
Hello Everyone,
I am mining with 2 4TB Buffalo External, 1.5 TB WD Book, 1 500mb WD passport and 1 500MB secondary internal HDD. The speed of the drives are different. There are some with 7200 and others with 5400 read/write speeds. I used the xplotter.avx attached to the Burst Client to write the plots and when I tried using the 1.03 optimizer it gave me the message the drive is already categorized.
Should I run different speed and size drives when mining Burstcoin? It seems when I use just the larger drives, it gives me more found/sent/confirmed messages when mining. Is this coincidental or is there something to it? Thanks in advance.