Posts made by burstminergrow

Thank you for your reply
I have a large mining farm at the moment consisting of GPU's
which is being upgraded by end of this month
To that i wanted to add 1 PB of drives as part of my set up
using 4 tb drives this is 250 drives or 8tb 125 drives
having researched a few things
its going to be difficult running more then 20 drives on one machine
so will have to use multiple machines
burst is a very steep learning curve
and before i make any further investment
if i was say to run 5 machines how should it be set up

I finally fixed my stagger size problem
at the moment i only have 4 usb ports and 8 drives
so im running 4 on drives each on 2 computers
but im getting errors on the pool end
what is the correct way of running multiple drives over a few machines
?

guys thank you so much for your help
i found out what was causing my problem
having watched videos on the web
i was using stagger sizes of whole numbers like 20000
researching more i needed to use stagger sizes in multiples of 8 like 20480
now i'm running 3 hard drives on one machine
i dont get bullshit errors about overlaps and loads of non confirmed
it took me a while to figure this out and i see myself as tech savvy
i guess not lol
i might spend a bit of time this weekend trying to write an idiots guide to burst mining

Manual setting of stagger

Hi guys
If you could help me i would be very grateful
I have plotted multiple 8 tb drives over multiple computers
The problem I am having is when connecting multiple drives in a single computer
I set the starting nonce as the stagger size from last plot plus 1
When i do this i got loads of non confirmed downloads as if the plots are corrupted
If i run a single drive starting from 0-300000000 across multiple plots i dont have a problem
can someone please inform me the manual way of setting this correctly over multiple drives