AIO wallet not working



  • I am having a problem with my wallet. I am trying to run the AIO Burst Client for Wim v0.3.10. When I do this the window has the tab "online wallet" grayed out and after about a minute, I get a page that says "navigation to web page was canceled." Any ideas on what the problem might be?


  • admin



  • I downloaded the latest wallet. When I login and go to mining, I can choose a pool just fine, however, it does not see my plot files. I plotted the files with xplotter on drives E, F and G. How can I get the AIO wallet to see my plot files?



  • @haitch see above reply.


  • admin

    @khnkdn The files need to be in [Drive]:\plots



  • @haitch They are, and have been.



  • @khnkdn can you post the Content of your miner.conf file here?

    Also, check for the semicolon at the end of this line:

    "Paths":
    [
    "E:\Burst\plots","F:\Burst\plots","G:\Burst\plots","D:\Burst\plots","J:\Burst\plots"
    ],


  • admin

    @khnkdn sorry, not \plots, \burst\plots



  • @Marc Here is my config file. The miner now sees my plots, now that I changed the directories. However, when I started the miner, it seems like it is hung. I chose the CPU option rather than the openCL - not knowing what open CL is. Also thanks for you patience in working with me to get me going. Thanks to @haitch for his advice.

    Here is the config file (the top portion):

    #### PEER NETWORKING ####
    
    # Announce my IP address/hostname to peers and allow them to share it with other peers.
    # If disabled, peer networking servlet will not be started at all.
    nxt.shareMyAddress=true
    
    # Port for incoming peer to peer networking requests, if enabled.
    nxt.peerServerPort=8123
    
    # Host interface on which to listen for peer networking requests, default all.
    # Use 0.0.0.0 to listen on all IPv4 interfaces or :: to listen on all IPv4 and IPv6 interfaces
    nxt.peerServerHost=0.0.0.0
    
    # My externally visible IP address or host name, to be announced to peers.
    # It can optionally include a port number, which will also be announced to peers,
    # and may be different from nxt.peerServerPort (useful if you do port forwarding behind a router).
    nxt.myAddress=73.174.249.186:8123
    
    # My platform, to be announced to peers.
    nxt.myPlatform=AIO
    
    # My hallmark, if available.
    nxt.myHallmark=
    
    # A list of well known peer addresses / host names, separated by '; '.
    # If not set, a random selection of nxtcrypto.org and nxtbase.com nodes is used.
    nxt.wellKnownPeers=192.99.183.10; 18.116.7.200; 84.249.20.155; 45.58.62.236; 210.54.33.230; 203.167.243.44; 210.115.228.231; 171.98.174.125; 38.114.101.88; 38.114.101.87; 158.69.53.36; 176.9.25.254; 5.104.175.156; 5.104.175.157; 37.97.40.203; 192.99.47.76; 87.167.177.45; 5.9.124.68; 1.179.201.220; 75.158.125.140; 160.36.130.180; 178.136.98.153; 5.104.175.162; 91.121.159.44; 203.59.236.69; 5.9.119.180; 70.95.197.163; 88.99.249.245; 89.179.240.131; 126.124.211.226; 92.81.73.43; 178.63.87.215; 211.218.247.79; 71.166.55.129; 5.104.175.152; 5.104.175.154; 162.236.93.205; 75.189.195.82; 5.104.175.134; 5.104.175.137; 5.104.175.138; 107.141.2.251; 137.248.121.73; 88.106.222.81; 204.45.61.2; 85.217.171.59; 184.161.232.180; 213.113.246.35; 38.114.101.90; 188.2.144.168; 137.248.122.195; 162.243.144.202; 199.189.85.178; 111.90.145.100; 218.38.28.183; 5.104.175.11; 203.158.118.10; 151.80.42.137; 103.76.180.145; 88.99.166.52; 24.160.75.65; 198.27.68.159; 62.75.187.160; 91.189.160.214; 5.104.175.131; 73.169.38.202; 78.46.37.137; 103.251.107.78; 62.224.96.21; 95.165.143.249; 5.153.225.55; 5.189.165.186; 210.115.227.99; 213.136.69.222; 81.94.202.156; 81.83.5.50; 89.106.1.126; 77.120.101.95; 93.123.73.133; 202.5.195.252; 35.187.253.145; 77.120.101.180; 216.165.179.49; 162.248.4.26; 85.10.211.130; 192.161.209.104; 185.144.131.131; 2.81.168.154; 112.167.81.44; 86.19.102.12; 211.104.175.60; 87.98.145.132; 174.36.0.110; 88.115.127.46; 128.171.53.34; 173.238.248.170; 5.104.175.110; 90.126.120.47; 5.104.175.211; 37.120.185.33; 46.4.126.236; 108.238.244.144; 5.104.175.214; 112.161.84.93; 39.117.137.191; 5.9.106.250; 176.9.43.13; 67.68.14.47; 151.80.16.34; 223.19.255.106; 
    
    # These peers will always be sent rebroadcast transactions. They are also automatically added to wellKnownPeers, so no need for duplicates.
    burst.rebroadcastPeers=a.storj.eu; 158.69.150.192
    
    # Connect to this many well known peers before using the peer database to get connected faster.
    # Set to 0 or comment out to disable.
    burst.connectWellKnownFirst=10
    
    # Known bad peers to be blacklisted
    nxt.knownBlacklistedPeers=5.9.38.137; 173.208.136.90; 173.208.190.202; 192.95.29.212; 220.245.28.142; 82.69.50.50; 176.9.101.198; 142.54.176.2; 128.199.135.188; 178.33.177.212; 92.27.7.209; 212.65.15.181; 192.198.95.50; 194.44.30.113; 77.99.233.40; 218.219.86.185; 50.172.21.160; 85.25.200.125; 216.46.193.254; 23.92.53.153; 86.58.34.51; 79.133.238.86; 203.128.6.219; 107.181.133.122; 198.23.133.18; 212.24.110.109; [2a02:c7d:cc41:1f00:9cc1:b80c:8bc3:2a29]; 178.16.84.78; 213.32.102.140; 87.246.37.190; 5.9.99.103; 194.252.183.86; 199.116.131.9; 5.9.70.198; 213.160.187.186; 107.173.57.109; 109.197.120.93;
    
    # Peers used for testnet only.
    nxt.testnetPeers=
    
    # Maintain active connections with at least that many peers.
    nxt.maxNumberOfConnectedPublicPeers=20
    
    # Peer networking connect timeout for outgoing connections.
    nxt.connectTimeout=4000
    
    # Peer networking read timeout for outgoing connections.
    nxt.readTimeout=8000
    
    # Peer networking server idle timeout, milliseconds.
    nxt.peerServerIdleTimeout=30000
    
    # Use the peer hallmark to only connect with peers above the defined push/pull hallmark thresholds.
    nxt.enableHallmarkProtection=false
    
    # Hallmark threshold to use when sending data to peers.
    nxt.pushThreshold=0
    
    # Hallmark threshold to use when requesting data from peers.
    nxt.pullThreshold=0
    
    # Blacklist peers for 600000 milliseconds (i.e. 10 minutes by default).
    nxt.blacklistingPeriod=600000
    
    # Consider a new transaction or block sent after 10 peers have received it.
    nxt.sendToPeersLimit=10
    
    # Enable the Jetty Denial of Service Filter for the peer networking server.
    nxt.enablePeerServerDoSFilter=true
    
    # Compress Http responses for the peer networking server.
    nxt.enablePeerServerGZIPFilter=true```
    


  • @khnkdn If you are using the aio the configuration of the miner you find it here C:\Users\YOURUSER\AppData\Roaming\BurstWallet\miner-burst-1.170820 in the file miner.conf

    It would be best if you put a screenshot of the aio when you try to lull, the configuration of the miner and indicate where you have the plots to see if the configuration is correct


Log in to reply
 

Looks like your connection to Burst - Efficient HDD Mining was lost, please wait while we try to reconnect.