reading speed is falling
-
Hello,
Can anyone help me? The reading speed of my 40 tb was 30 seconds. After i build in a second videocard, restarted the computer and restarted my rig, the reading speed starts with an average of 630 mb/s and then, after 68 percent, fals down to 120 mb/s. whats wrong?
regards,
Bas
-
Which miner?
Read time for each drive before and after?
Anything else running on the PC?
-
Miner: Jminer 0.4.10
14 drives were always done in 35 seconds.
So a little 2,5 seconds for a drive.Only running the burst wallet. Nothing else.
In the beginning the reading speed is high (eff. 1007 mb/s)
At half the eff. speed is 690 mb/s
At 80 percent the eff. speed is: 211 mb/s
and at the end the miner gives eff. 44 mb/s
-
I think i found the sollution. Are not optimized plots so much slower than optimized ones?
4 of the 5 plots on one disc ar'nt optimized....
-
Yep.. Unoptimized plots are VERY slow. Might also be that your discs are reading at the same time then you finish reading all discs but one. And on that disc the max read speed is 130
-
i assume that i got the same results as with optimized plots? only that my reading is slower with the risk of missing only a fast block?
