PLOTING NEXT DRIVE
-
hello, dont understand what is point ploting next drive
X=number nounces 8TB drive=29696000 nounces1st drive was ploted from 0 to X1
2nd drive will be plot form X1 to X2? and 3rd drive will be plot from X2 to X3 etc?XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 29696000 -n 59392000 -t 4 -path O:\plots -mem 24G
cos i tried plot by cpu this way and i see error: not enough space
thanks for help
-
in this situation i would do: xplotter.exe -id -sn 29696000 -n -t 4 -path O:\plots -mem 24G
that way it is calculated by the plotter
-
@ZapbuzZ said in PLOTING NEXT DRIVE:
in this situation i would do: xplotter.exe -id -sn 29696000 -n -t 4 -path O:\plots -mem 24G
that way it is calculated by the plotter
xplotter.exe -id -sn 29696000 -t 4 -path O:\plots -mem 24G
-n was too much :-) @pipop without -n = numberOfNonces, xplotter will auto plot whole drive.
-
thanks @luxe it did work automatically with the -n, however.
-
@ZapbuzZ ah ok sry, than it was just obsolete :-)
-
so can be this?
1TB drive
DriveA, start 0 end 3 700 000
DriveB, start 3 700 001 end 7 400 001
DriveC, start 7 400 002 end 11 100 002
DriveD, start 11 100 003 end 14 800 003XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 0 -n 3700000 -t 4 -path O:\plots -mem 24G
XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 3700001 -n 3700000 -t 4 -path O:\plots -mem 24G
XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 7400002 -n 3700000 -t 4 -path O:\plots -mem 24G
XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 11100003 -n 3700000 -t 4 -path O:\plots -mem 24G
-
@pipop said in PLOTING NEXT DRIVE:
XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 0 -n 3700000 -t 4 -path O:\plots -mem 24G
XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 3700001 -n 3700000 -t 4 -path O:\plots -mem 24G
XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 7400002 -n 3700000 -t 4 -path O:\plots -mem 24G
XPlotter_sse.exe -id xxxxxxxxxxxxx -sn 11100003 -n 3700000 -t 4 -path O:\plots -mem 24GLooks good, but if you start with 0 (first nonce) and you do 3700000 nonces, the last one is 3699999, so next drive can start with 3700000. After all, it does not matter you can also start next drive with 10000000 ... feel free to leave some nonce-numbers unused.
-
@luxe said in PLOTING NEXT DRIVE:
Looks good, but if you start with 0 (first nonce) and you do 3700000 nonces, the last one is 3699999, so next drive can start with 3700000. After all, it does not matter you can also start next drive with 10000000 ... feel free to leave some nonce-numbers unused.
yes, i had any free nonces: when drive has official 931GB=nonces 3 813 376 i set up 3 700 000.... its right?
what happen if plots has different sequences with this numbers?
-
@pipop just define the startnonces, remove '-n xxxxx' xplotter will auto determ max possible nonces ... choose startnonces big enough to not overlap
-
can you show me how it will be look command line first 3 drives with 8TB from 1st drive where will be start from 0 for example? it will be best to understand how have to continue sequences
driveA XPlotter_avx.exe -id WALLETNUMBER -sn 0 -t 16 -path O:\plots -mem 24G
driveB ???
driveC ???thx..appreciate it
-
@pipop Drive B SN = the last nonce in Drive A + 1, Drive C SN = Drive B SN + Drive B (number of nonces) + 1
So if Drive A is SN 0, number of nonces 1000, then drive B SN = 1000, if number of nonces = 2000, then Drive C will be SN (1000) + Number of Nonces (2000) -> SN = 3000
-
i dont know what xplotter setuped number of nonces....if?so where i can see what xplotter setup max nonces?
drive A will be start with this command Plotter_avx.exe -id WALLETNUMBER -sn 0 -t 16 -path O:\plots -mem 24G
drive B Plotter_avx.exe -id WALLETNUMBER -sn 1000 -n 2000 -t 16 -path O:\plots -mem 24G
drive C Plotter_avx.exe -id WALLETNUMBER -sn 2001 -n 2000 -t 16 -path O:\plots -mem 24G
drive D Plotter_avx.exe -id WALLETNUMBER -sn 3002 -n 2000 -t 16 -path O:\plots -mem 24G
.
.
.
-
@pipop To fill the whole drive leave the -n parameter blank. To see the number of nonces in the previous file, use File Explorer to look at the drive and the file - the format of the filename is <burst id>_<starting nonce>_<number of nonces>_<stagger>
-
drive A Plotter_avx.exe -id WALLETNUMBER -sn 0 -t 16 -path O:\plots -mem 24G
drive B Plotter_avx.exe -id WALLETNUMBER -sn 1000 -t 16 -path O:\plots -mem 24G
drive C Plotter_avx.exe -id WALLETNUMBER -sn 2001 -t 16 -path O:\plots -mem 24G
drive D Plotter_avx.exe -id WALLETNUMBER -sn 3002 -t 16 -path O:\plots -mem 24G
.
.
.
its OK now? still dont understand, where i can found how big nonces xplotter used.....

