31.1MH Eth 575MH DCR dual on MSI Rx 480 8gb
-
well it seems those cards are super like sapphires
i have tested this msi bios
on MSI Rx 480 8GB cards
and got 31MH ETH 575 DCR with 56C average temp
did not test the watt yet but im sure its like 140 to 160 watt pwr cardtell me your feedback with the bios on msi
-
@Heterodyne said in 31.1MH Eth 575MH DCR dual on MSI Rx 480 8gb:
sapphires
Interesting, which mod are you using?
I tried dual mining and resulted with burned risers and increase power consumption so I settled with single ETH mining.
Update: I use Sapphire RX480 Nitro+ 8GB & Sapphire RX470 Nitro+ 8GB
-
@rnahlawi said in 31.1MH Eth 575MH DCR dual on MSI Rx 480 8gb:
I tried dual mining and resulted with burned risers and increase power consumption...
Perhaps dual-mining would work better if the GPUs were plugged directly into PCI slots (if available)?
-
@BeholdMiNuggets Agree, but no mother board will take more than 2 cards. I have 6x6 in 2 rigs!
-
@rnahlawi said in 31.1MH Eth 575MH DCR dual on MSI Rx 480 8gb:
Agree, but no mother board will take more than 2 cards
You might want to look at one of the 4-Way SLI /Crossfire MotherBoards. Eg.
http://www.gigabyte.com/Motherboard/GA-X99P-SLI-rev-10#ov
Thou they generally don't come cheap (unless used). And you may need a CPU with more than 16 PCIe lanes (also not the cheapest). Some of the older X99 CPUs have 28 or 40 lanes for example. Plus, powering the GPUs directly from the PSU... And a Case with enough slots etc... And more cooling...And after all that, is it still economic?
