Mining Question
-
Using internal 1tb drive d and wd mybook 8tb drive e
Drive D seems to be the only one getting dl's.
I used xplotter ran as admin
only getting 200 plus burst per day.
Not sure what to do next?
-
I am using usb 3.0 port also
-
@PETENICE did you try to optimize your plot?
-
@popoy17 I tried but I could not get it to work.
Which one should I use?
I thought xplotter automatically optimizes your plots?
-
@PETENICE Xplotter does optimise the Plots. It is not possible from the Miner Display to know which Plot is finding the Deadlines, as D ten times the size of E it will be finding most of them.
I would say everything is running fine, 200 Burst a day is a little low, but you will see a lot of variance Day to Day.
Rich
-
@RichBC said in Mining Question:
It is not possible from the Miner Display to know which Plot is finding the Deadlines, as D ten times the size of E it will be finding most of them.
I would say everything is running fine, 200 Burst a day is a little low, but you will see a lot of variance Day to Day.
Rich
Ah that's good to know. I always thought that the DL above the drive was the one that got the DL. Thanks for clearing/informing that information up for me Superfriend! BOOM! Boom...and all that!
-
@Vneck The download shown above the drive is just that it had finished scanning it's plots. It's the smaller drive so will always finish first, however both drives are being scanned in at the same time.
Rich
-
@PETENICE try switching pools, it looks like everything is working correctly.
-
-
@PETENICE To use AVX your Processor needs to support it, however from you first screenshot it does not, so it will not run.
Rich
-
@PETENICE you can look into the logfile to find out in which plotfile the deadline was found.
Search forfound deadlineand then at the end of the line is the plotfile.
-
@Creepsky not sure how to do that, but I will try and figure it out. Thanks
-
@Creepsky where is the logfile found
-
@PETENICE should be in the same folder as the miner exe in the sub-dir /Logs.
