Jminer Setup
-
@luxe
It's working now ! Thank's for all your help!
-
Whats the optimal setup for:
chunkPartNonces=
readerThreads=How do you decide? 1 or more readerThreads per drive?
Is the default value of chunkPartNonces=320000 optimal?
I have an AMD RX480 and 6 drives at the moment!
-
Please check:
https://github.com/de-luxe/burstcoin-jminer/wiki/configure-jminer.properties#miner-memory-usage
If you have enough memory 'readerThreads=0' and increase chunkPartNonces ... chunkPartNonces higher than staggersize has no effect.If you still have questions, feel free to ask.
Nice, 6 drives and how much capacity? How about post a screen of jminer running, maybe i find something to improve.
-
@luxe
Yes, I read that page! But i still wonder if default(320000) or 960000 is better? It says depending on how strong the GPU is!
How do you calculate the number optimal for your system? Or do you have to try different amounts?
The drives are not that large 1-2TB each but 60 to 80 MB/s seems slow!
-
@BurstmanJens
Do you use optimized plotfiles? How high is your staggersize?
(if you do now know what i mean, add 'listPlotFiles=true' and make a screen)
How about just try if 960000 is better for you :-)
Also try add 'showDriveInfo=true' to get more detailed info, how every drive performs.
-
@luxe
Is restarting Jminer while plotting a drive wise?
Do you have to restart Jminer to take the new properies?
-
@BurstmanJens No need to hurry ... may work, but i would let it run.
Yes changes only take effect after restart.
-
@luxe
Ok. I'll try the changes you suggested after the new drive is plotted!
-
@luxe
It seems too have little or no effect when I change chunkPartNonces to 960000 instead of 320000!
How do you optimize plotfiles?
-
http://forums.burst-team.us:4567/topic/26/plot-optimizer-v1-6-with-gui-1-0-3-j6jq-win/2
http://forums.burst-team.us:4567/topic/25/plot-optimizer-v1-6-win
-
I went through those problems but now I have one that I am sure is easy to fix. I learned via youtube over many hours how to use jminer for my burst, now i am getting what I assume is the not confirmed message. I would not get it using Blago except maybe once a day. Here is a screenshot, do I need to make a small change? Thanks in advance!
-
@Rorepme Increase connectionTimeout in jminer.properties, in most cases the pool received your nonce, but was just not able to answer in time.
-
@luxe it's at 12000 now, what do you suggest? I set it to 24000
-
I set the time to 36000 now and am still getting the 6 second timeout
-
It still says timeout is at 6 secs? How
-
@Rorepme Very odd, did you save the properties file and restart jminer?
Rich
-
@RichBC Sure did. Maybe I should reboot the PC altogether
-
-
okay, I am growing quite tired of the timeout on connection. No one else has anything that may fix it? I have it set at 20 seconds but I keep getting the warning.
-
Do you use jminer from within the win client? If yes, it may overwrite your manual settings.
Try to start jminer directly with included start.bat/sh in miner directory.Or does jminer use 32 sec. connection timeout and that still is not enough time for pool to response?!
Than i would suggest try another pool.
