pool problems
-
@chickenliver said in pool problems:
"F:\Burst\plots"
Need double slashes. (Note I spaced them apart because this website deletes one)"F:\ \Burst\ \plots"
-
@Burstde It should be "F:\Burst\plots"
-
You need a double slash. Single slashes only work with dos and other programming languages but not this language
You also might want to reduce the Cache Size. I tried your Conf and it works better when your cache size is reduced. 1000 or 4000
"CacheSize" : 4000,
-
Hi, the double slash is there, I think it got deleted when I posted it on the forum. There seems to be a connection error, I am posting the miner log.
09:30:56 Mode: 1
09:30:56 Server: pool.burstcoin.de
09:30:56 Port: 8080
09:30:56 Path: F:\Burst\plots
09:30:56 CacheSize: 100000
09:30:56 UseHDDWakeUp: 0
09:30:56 ShowMsg: 0
09:30:56 ShowUpdates: 0
09:30:56 SendInterval: 100
09:30:56 UpdateInterval: 950
09:30:56 UseFastRcv: 0
09:30:56 Debug: 1
09:30:56 Updater address: pool.burstcoin.de
09:30:56 Updater port: 8080
09:30:56 Info address: pool.burstcoin.de
09:30:56 Info port: 8080
09:30:56 EnableProxy: 0
09:30:56 ProxyPort: 8126
09:30:56 ShowWinner: 0
09:30:56 SendBestOnly: 1
09:30:56 TargetDeadline: 4000000
09:30:56 UseBoost: 0
09:30:56 WinSizeX: 80
09:30:56 WinSizeY: 60
09:30:56 === Config loaded ===
09:30:56 Miner path: C:\Users\Aren\Desktop\BurstWallet\miner-burst-1.160705
09:30:56 Searching servers...
09:30:56 Address: pool.burstcoin.de defined as: 32.214.111.43
09:30:56 Address: pool.burstcoin.de defined as: 32.214.111.43
09:30:56 Updater thread started
09:30:56 Update mining info
09:30:58 *! GMI: connect function failed with error: 10061
09:31:13 *! GMI: connect function failed with error: 10060
09:31:18 *! GMI: connect function failed with error: 10061
09:31:21 *! GMI: connect function failed with error: 10061
09:31:24 *! GMI: connect function failed with error: 10061
-
@chickenliver At around that time my secondary router malfunctioned and was replaced with new one. Two routers had their firmware messed up. Not sure what your address is but 4 miners have been mining
-
Hi, have just started miner same problem my mining address is BURST-H963-46P2-PSSR-F7E7Y will try to mine with another pool to check if there is a connectivity problem from my side. Here is my miner log.
11:23:12 Mode: 1
11:23:12 Server: pool.burstcoin.de
11:23:12 Port: 8080
11:23:12 Path: F:\Burst\plots
11:23:12 CacheSize: 100000
11:23:12 UseHDDWakeUp: 0
11:23:12 ShowMsg: 0
11:23:12 ShowUpdates: 0
11:23:12 SendInterval: 100
11:23:12 UpdateInterval: 950
11:23:12 UseFastRcv: 0
11:23:12 Debug: 1
11:23:12 Updater address: pool.burstcoin.de
11:23:12 Updater port: 8080
11:23:12 Info address: pool.burstcoin.de
11:23:12 Info port: 8080
11:23:12 EnableProxy: 0
11:23:12 ProxyPort: 8126
11:23:12 ShowWinner: 0
11:23:12 SendBestOnly: 1
11:23:12 TargetDeadline: 4000000
11:23:12 UseBoost: 0
11:23:12 WinSizeX: 80
11:23:12 WinSizeY: 60
11:23:12 === Config loaded ===
11:23:12 Miner path: C:\Users\Aren\Desktop\BurstWallet\miner-burst-1.160705
11:23:12 Searching servers...
11:23:12 Address: pool.burstcoin.de defined as: 32.214.111.43
11:23:12 Address: pool.burstcoin.de defined as: 32.214.111.43
11:23:12 Updater thread started
11:23:12 Update mining info
11:23:14 *! GMI: connect function failed with error: 10061
11:23:17 *! GMI: connect function failed with error: 10061
11:23:20 *! GMI: connect function failed with error: 10061
11:23:35 *! GMI: connect function failed with error: 10060
11:23:38 *! GMI: connect function failed with error: 10061
11:23:41 *! GMI: connect function failed with error: 10061
11:23:46 *! GMI: connect function failed with error: 10061
11:23:49 *! GMI: connect function failed with error: 10061
11:23:52 *! GMI: connect function failed with error: 10061
11:24:00 *! GMI: connect function failed with error: 10061
11:24:03 *! GMI: connect function failed with error: 10061
11:24:06 *! GMI: connect function failed with error: 10061
11:24:09 *! GMI: connect function failed with error: 10061
11:24:12 *! GMI: connect function failed with error: 10061
11:24:15 *! GMI: connect function failed with error: 10061
11:24:18 *! GMI: connect function failed with error: 10061
11:24:21 *! GMI: connect function failed with error: 10061
11:24:24 *! GMI: connect function failed with error: 10061
11:24:39 *! GMI: connect function failed with error: 10060
11:24:42 *! GMI: connect function failed with error: 10061
11:24:46 *! GMI: connect function failed with error: 10061
11:24:51 *! GMI: connect function failed with error: 10061
11:24:54 *! GMI: connect function failed with error: 10061
11:24:57 *! GMI: connect function failed with error: 10061
11:25:00 *! GMI: connect function failed with error: 10061
11:25:22 *! GMI: connect function failed with error: 10060
11:25:26 *! GMI: connect function failed with error: 10061
11:25:36 *! GMI: connect function failed with error: 10061
11:25:57 *! GMI: connect function failed with error: 10060
11:26:00 *! GMI: connect function failed with error: 10061
11:26:03 *! GMI: connect function failed with error: 10061
11:26:11 *! GMI: connect function failed with error: 10061
11:26:14 *! GMI: connect function failed with error: 10061
11:26:17 *! GMI: connect function failed with error: 10061
11:26:28 *! GMI: connect function failed with error: 10061
11:26:37 *! GMI: connect function failed with error: 10061
11:26:40 *! GMI: connect function failed with error: 10061
11:26:55 *! GMI: connect function failed with error: 10060
11:26:58 *! GMI: connect function failed with error: 10061
11:27:03 *! GMI: connect function failed with error: 10061
11:27:06 *! GMI: connect function failed with error: 10061
11:27:11 *! GMI: connect function failed with error: 10061
11:27:14 *! GMI: connect function failed with error: 10061
11:27:17 *! GMI: connect function failed with error: 10061
11:27:20 *! GMI: connect function failed with error: 10061
11:27:23 *! GMI: connect function failed with error: 10061
11:27:26 *! GMI: connect function failed with error: 10061
11:27:31 *! GMI: connect function failed with error: 10061
11:27:36 *! GMI: connect function failed with error: 10061
11:27:39 *! GMI: connect function failed with error: 10061
11:27:42 *! GMI: connect function failed with error: 10061
11:27:45 *! GMI: connect function failed with error: 10061
11:28:00 *! GMI: connect function failed with error: 10060
11:28:15 *! GMI: connect function failed with error: 10060
-
Hi, just connected miner to tross pool it is working ok. Will retry to connect to your pool after sometime.
-
@chickenliver Doesn't matter make another copy of your blago folder. change the miner.conf to point to my pool and launch miner.exe. If you can connect you will see an error about reward assignments however atleast we know it works . What country are you mining from? leave your other plot mining on Trosses as this is just a test
-
Hi, still getting the connection error. I am mining from India. Here is the miner log.
14:23:50 Mode: 1
14:23:50 Server: pool.burstcoin.de
14:23:50 Port: 8080
14:23:50 Path: F:\Burst\plots
14:23:50 CacheSize: 100000
14:23:50 UseHDDWakeUp: 0
14:23:50 ShowMsg: 0
14:23:50 ShowUpdates: 0
14:23:50 SendInterval: 100
14:23:50 UpdateInterval: 950
14:23:50 UseFastRcv: 0
14:23:50 Debug: 1
14:23:50 Updater address: pool.burstcoin.de
14:23:50 Updater port: 8080
14:23:50 Info address: pool.burstcoin.de
14:23:50 Info port: 8080
14:23:50 EnableProxy: 0
14:23:50 ProxyPort: 8126
14:23:50 ShowWinner: 0
14:23:50 SendBestOnly: 1
14:23:50 TargetDeadline: 4000000
14:23:50 UseBoost: 0
14:23:50 WinSizeX: 80
14:23:50 WinSizeY: 60
14:23:50 === Config loaded ===
14:23:50 Miner path: C:\Users\Aren\Desktop\miner-burst-1.160705
14:23:50 Searching servers...
14:23:51 Address: pool.burstcoin.de defined as: 32.214.111.43
14:23:51 Address: pool.burstcoin.de defined as: 32.214.111.43
14:23:51 Updater thread started
14:23:51 Update mining info
14:23:58 *! GMI: connect function failed with error: 10061
14:24:01 *! GMI: connect function failed with error: 10061
14:24:04 *! GMI: connect function failed with error: 10061
14:24:07 *! GMI: connect function failed with error: 10061
14:24:09 *! GMI: connect function failed with error: 10061
14:24:12 *! GMI: connect function failed with error: 10061
14:24:27 *! GMI: connect function failed with error: 10060
14:24:30 *! GMI: connect function failed with error: 10061
14:24:33 *! GMI: connect function failed with error: 10061
14:24:36 *! GMI: connect function failed with error: 10061
14:24:41 *! GMI: connect function failed with error: 10061
14:24:44 *! GMI: connect function failed with error: 10061
14:24:47 *! GMI: connect function failed with error: 10061
14:24:50 *! GMI: connect function failed with error: 10061
14:24:53 *! GMI: connect function failed with error: 10061
-
This post is deleted!
