third hdd will not read plot.



  • having some problems with my newst WD green 2Tb hdd. have it set to G:
    plottet about 1.5 gig's out of it with the client plotter and everything seems just fine.

    whenever i try mine now it will find E: F: G: , but only E: and F: is successfully scanned..
    the G: drive is just keep scanning and totally stops at around 88-89%

    tried to delete the files, format the hard drive and Plottet for 30 more hours with no effect at all!
    so if any know any tips/tricks for me i would appriciate it to the fullest....

    here's some details im getting if any help :)

    Using plots:
    G:\Burst\plots files: 1 size: 1577 Gb
    F:\Burst\plots files: 1 size: 833 Gb
    E:\Burst\plots files: 1 size: 832 Gb
    TOTAL: 3244 Gb

    08:24:59 New block 242318, baseTarget 2135849, netDiff 8579 Tb
    08:25:01 [ 2919366023978843920] found DL: 695279
    08:25:01 [ 2919366023978843920] sent DL: 695279 8d 01:07:59
    08:25:04 Thread "F:\Burst\plots" @ 5.3 sec (39.5 MB/s) CPU 31.52%
    08:25:05 [ 2919366023978843920] found DL: 158368
    08:25:05 [ 2919366023978843920] sent DL: 158368 1d 19:59:28
    08:25:06 [ 2919366023978843920] confirmed DL: 695279 8d 01:07:59
    08:25:06 Thread "E:\Burst\plots" @ 7.1 sec (29.2 MB/s) CPU 27.78%
    08:25:07 [ 2919366023978843920] confirmed DL: 158368 1d 19:59:28

    08:30:33 New block 242319, baseTarget 2106396, netDiff 8699 Tb
    08:30:38 Thread "F:\Burst\plots" @ 5.2 sec (40.2 MB/s) CPU 31.25%
    08:30:39 [ 2919366023978843920] found DL: 3046144
    08:30:40 [ 2919366023978843920] sent DL: 3046144 35d 06:09:04
    08:30:40 Thread "E:\Burst\plots" @ 7.1 sec (29.5 MB/s) CPU 28.68%
    08:30:40 [ 2919366023978843920] confirmed DL: 3046144 35d 06:09:04

    and are the times good enough? or should i get some faster hdd's? :D


  • Mod

    show screenshot of files in G:\Burst\plots (we need to see filename and file size)



  • 0_1466318912795_2016-06-19.png

    like this? thanks for soo fast respond



  • 0_1466319120120_2016-06-19 (1).png

    screen of the miner ( 16.80 MB/s ) only gets lower, before a new block is discovered!


  • Mod

    right click at file -> properties
    you plot must be 1694163271680 bytes (6462720 * 64 * 4096)

    send me your last log file from folder "Logs" to blagodarenko@gmail.com
    0_1466319505166_Снимок.JPG



  • sent u an mail now with last logs :) hope it help some.

    so i wanna change my plot too that number?


  • Mod

    2919366023978843920_700000001_6462720_16320 damaged, miner can't find end of file.

    give me file size in bytes of 2919366023978843920_700000001_6462720_16320



  • what? is it damaged right out of the Plotting :(
    well well, im learning.
    file size is 1 654 456 320 KB or is this not what u need?


  • Mod

    can you specify the exact size in bytes? (not Kb)
    seems plot not complete...



  • @Blago
    Lol sorry, no sleep in few days messes with the focus a bit :P

    here's what u want i think...?

    1,54 TB (1 694 163 271 680 byte)


  • Mod

    file size - ok.

    i need to see "bytes per cluster"

    1. Run "cmd" as Admin
    2. Type chkdsk, and then press ENTER
    3. Make screenshot after finish


  • @Blago
    was not allowed to take a screen of the cmd.. but this is what i got from it...

    Microsoft Windows [Version 10.0.10586]
    (c) 2015 Microsoft Corporation. Med enerett.

    C:\WINDOWS\system32>chkdsk
    The type of the file system is NTFS.
    Volume label is Windows SSD.

    WARNING! /F parameter not specified.
    Running CHKDSK in read-only mode.

    Stage 1: Examining basic file system structure ...
    538880 file records processed.
    File verification completed.
    9048 large file records processed.
    0 bad file records processed.

    Stage 2: Examining file name linkage ...
    594166 index entries processed.
    Index verification completed.
    0 unindexed files scanned.
    0 unindexed files recovered to lost and found.

    Stage 3: Examining security descriptors ...
    Security descriptor verification completed.
    27644 data files processed.
    CHKDSK is verifying Usn Journal...
    34193736 USN bytes processed.
    Usn Journal verification completed.

    Windows has scanned the file system and found no problems.
    No further action is required.

    116399103 KB total disk space.
    33457376 KB in 102703 files.
    78844 KB in 27645 indexes.
    0 KB in bad sectors.
    646639 KB in use by the system.
    65536 KB occupied by the log file.
    82216244 KB available on disk.

      4096 bytes in each allocation unit.
    

    29099775 total allocation units on disk.
    20554061 allocation units available on disk.

    C:\WINDOWS\system32>



  • really hope this helps out, depressing to see 1.5Tb of mine is not getting readings..
    could have like x2 burst per day if i have 2 times 1Tb now..?


  • Mod

    oh, sorry, my fault... this "chkdsk" was for drive C

    1.Run "cmd" as Admin
    2.Type g: , and then press ENTER
    3.Type chkdsk, and then press ENTER
    4.Make screenshot after finish



  • @Blago
    it does not do anything?
    get the G:\ going. when i type chkdsk it just freezes or something.



  • something came up now.

    Microsoft Windows [Version 10.0.10586]
    (c) 2015 Microsoft Corporation. Med enerett.

    C:\WINDOWS\system32>g:

    G:>chkdsk
    The type of the file system is NTFS.


  • Mod

    strange... another way:

    1.Run "cmd" as Admin
    2.Type fsutil fsinfo sectorInfo g: , and then press ENTER
    3.Make screenshot after finish



  • @Blago
    Strange what a little reboot may do! even do i needed a password for windows for the first time. Lol...

    anyways
    Microsoft Windows [Version 10.0.10586]
    (c) 2015 Microsoft Corporation. Med enerett.

    C:\WINDOWS\system32>G:

    G:>chkdsk
    The type of the file system is NTFS.
    Volume label is Nytt volum.

    WARNING! /F parameter not specified.
    Running CHKDSK in read-only mode.

    Stage 1: Examining basic file system structure ...
    512 file records processed.
    File verification completed.
    0 large file records processed.
    0 bad file records processed.

    Stage 2: Examining file name linkage ...
    564 index entries processed.
    Index verification completed.
    0 unindexed files scanned.
    0 unindexed files recovered to lost and found.

    Stage 3: Examining security descriptors ...
    Security descriptor verification completed.
    26 data files processed.

    Windows has scanned the file system and found no problems.
    No further action is required.

    1953512447 KB total disk space.
    1657669048 KB in 238 files.
    64 KB in 28 indexes.
    0 KB in bad sectors.
    126083 KB in use by the system.
    65536 KB occupied by the log file.
    295717252 KB available on disk.

      4096 bytes in each allocation unit.
    

    488378111 total allocation units on disk.
    73929313 allocation units available on disk.

    G:>



  • will it help to format the hdd yet again, and try Plot it once more?

    been trying this few times already now tho, but anything to get this to work again!


  • admin

    @ganji421 I haven't read all, but if you have trouble with a HDD, sometimes a slow format (not the fast one), can resolve issues.



  • @daWallet
    been Full format the hdd 2 times and tried mine afterward's already. but i guess it will not hurt with one more try..
    I'll give feedback in 2-3 days when its done :P


Log in to reply
 

Looks like your connection to Burst - Efficient HDD Mining was lost, please wait while we try to reconnect.