Jminer Error - Help

casadosprj

@haitch .... Follow bellow my configuration file .......

plotPaths=E:/Burst/plots,F:/Burst/plots,G:/Burst/plots,H:/Burst/plots,I:/Burst/plots,J:/Burst/plots,K:/Burst/plots,
scanPathsEveryRound=true
listPlotFiles=false
poolMining=true
numericAccountId=XXXXXXXXXXXXXXXXXXXXX
poolServer=http://pool.news-asset.com
walletServer=
winnerRetriesOnAsync=
winnerRetryIntervalInMs=
devPool=
devPoolCommitsPerRound=
soloServer=http://localhost:8125
passPhrase=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
targetDeadline=
platformId=0
deviceId=0
restartInterval=240
chunkPartNonces=320000
refreshInterval=2000
connectionTimeout=6000

Thanks

luxe

Checked your pooServer, http://pool.news-asset.com ... does not seam to work (maybe port missing?!)
I checked it via testing:
http://pool.news-asset.com/burst?requestType=getMiningInfo

haitch

@luxe The news-asset.com DNS entry is broken at the moment, us: http://216.165.179.44:7080

luxe

Thx @haitch ... so use:

poolServer=http://216.165.179.44:7080

casadosprj

Thank you @luxe and @haitch ....... Now the jminer send these messages ....

Nonce was committed to pool, but not confirmed ... caused by connection Timeout, currently '6 sec.' try increasing it!

How can I increasing it?

Follow the print

Thank you!

luxe

Time is in ms, so to increase it to 26sec for example:

connectionTimeout=26000

luxe

Btw. you still have 'restartInterval=240' in your config ... thats not part of jminer anymore, since some versions ... not sure where you get the config settings from ... latest jminer can always be found here:
https://github.com/de-luxe/burstcoin-jminer/releases

EDIT: I suggest not starting jminer from AIO client, not sure, but that may overwrite your manual settings ... just use the run.bat in miner folder.

casadosprj

@luxe Thank you again!
I think that 'restartInterval=240' is my mistake.

Now I think that it`s fine.

Look at the print!

Now I will try to make an overclocking in the GPU! LoL

Best Regards

luxe

@casadosprj I do not think that GPU is your bottleneck, may also be drive read speed. Cause for 15TB also CPU internal GPU should be faster than 40sec.

Check out:

showDriveInfo=true

To find the drive that slows down your setup.

casadosprj

@luxe .... I dont know how can I make this faster!

Now we can see the Drive Info ..... Follow bellow.......

Another point is about the DL confirmation .... I think this is also very time consuming.

luxe

@casadosprj Wow, ok it seams drive read speed is not your problem, cause all is read within 17sec. So you maybe right your GPU is the bottleneck. What are you using?! Have you tried

deviceId=1

to use your cpu internal GPU ?! (You may need openCL drivers from intel https://software.intel.com/en-us/intel-opencl)

EDIT: Well your Round time may also depend on the time, the pool needs to respond your deadline commit. So all your Setup may be fine, but you should consider try a pool witch can respond faster. Cause i see you commit all your deadlines and finish reading and stuff, and way after that the confirms are comming in. For me if i make a commit, i nearly instant get a confirm ... mostly before i commit another one. Don't get me wrong, your Setup is ok ... but you need so much time to finish round, cause the pool needs a looong time to respond, it seams.

e.g. for me it looks like:
2016-11-12 15:21:53.166 INFO 536 --- [ roundPool-1] burstcoin.jminer.JMinerCommandLine : dl '1258' send (solo)
2016-11-12 15:21:53.286 INFO 536 --- [ networkPool-1] burstcoin.jminer.JMinerCommandLine : dl '1258' confirmed! [ 0d 0h 20m 58s ]
so confirm only takes 100ms (well thats local wallet and no pool so surely faster)