Trying to GPU plot
-
for devices.txt these are safe settings for most of cards i think
i specifically adjusted it for my R9 270x 2GB card
0 0 1792 128 4096depending on how much RAM your card has you can change 4096 number
-
1 0 16192 128 8192
-
@kendrew and the command line you are using? gpuplotgenerator (account)(starting nonce)(number of nonces)_(stagger size)??
-
Hope you were able to fix your issue :)
-
[ERROR][-61][CL_INVALID_BUFFER_SIZE] Unable to create the OpenCL GPU buffer
PS C:\GPUPlotting> ./gpuPlotGenerator generate buffer D://plots/15600963419017244759_0_40000_20000GPU plot generator v4.0.3
Author: Cryo
Bitcoin: 138gMBhCrNkbaiTCmUhP9HLU9xwn5QKZgD
Burst: BURST-YA29-QCEW-QXC3-BKXDLLoading platforms...
Loading devices...
Loading devices configurations...
Initializing generation devices...[ERROR][-61][CL_INVALID_BUFFER_SIZE] Unable to create the OpenCL GPU buffer
PS C:\GPUPlotting>
-
@kendrew change the last number (20000) to 10000, if that does not work change it to 5000
-
C:\GPUPlotting>gpuPlotGenerator generate buffer D://plots/15600963419017244759_40000_40000_5000
GPU plot generator v4.0.3
Author: Cryo
Bitcoin: 138gMBhCrNkbaiTCmUhP9HLU9xwn5QKZgD
Burst: BURST-YA29-QCEW-QXC3-BKXDLLoading platforms...
Loading devices...
Loading devices configurations...
Initializing generation devices...[ERROR][-61][CL_INVALID_BUFFER_SIZE] Unable to create the OpenCL GPU buffer
C:\GPUPlotting>pause
Press any key to continue . . .
-
@kendrew in your devices.txt change the 3rd number reduce it, gradually save your change and then try it again
-
@iKnow0 same problem here even if I put everythin close to 0 the result is the same!
I have r9 380 4gb on ubuntu
-
@ccminer Kendrew got his working, post your devices.txt and the gpuPlotGenerator command line
-
@iKnow0 thank you I lowered a lot and I got another error
[ERROR][-11][CL_BUILD_PROGRAM_FAILURE] Unable to build the OpenCL program AMDGPUMCInstLower::lower - Pseudo instruction doesn't have a target-specific version: 174
-
@ccminer try these values 0 0 12288 192 8192
-
@ccminer what where the suggested default values?
-
@iKnow0
with these values I don't see the error -61 anymore but the -11 has I wrote above0 0 1010 128 8192
-
@ccminer try 0 0 512 128 8192
-
@iKnow0 said in Trying to GPU plot:
@ccminer try these values 0 0 12288 192 8192
with these parameters I get error -61
with these
0 0 1010 128 8192I start to get the new error
-
@iKnow0 said in Trying to GPU plot:
@ccminer try 0 0 512 128 8192
with these error -11
[ERROR][-11][CL_BUILD_PROGRAM_FAILURE] Unable to build the OpenCL program AMDGPUMCInstLower::lower - Pseudo instruction doesn't have a target-specific version: 174
-
@ccminer what command line are you using to plot
-
@iKnow0
I'm on ubuntu 16.10./gpuPlotGenerator generate buffer /media/ziomar/Maxtor/test_gpu_plot/10901550065498858982_0_3815000_381500
-
@ccminer use 0 0 12288 192 8192 and change the last number of the command line to 3815

