mining calculator precision

ccminer

@Dario's-wallet is there a linux version?

Dario's wallet

@ccminer No, sorry...

Dario's wallet

@ccminer But it doesn't matter what miner are u using, every miner can provide you some informations...

ccminer

@Dario's-wallet

this is my output since at leat 5 days:

Walet reported no deadline.
47 MB read/190 GB total/no deadline
New block 286929, basetarget 1620552
47 MB read/190 GB total/no deadline
New block 286930, basetarget 1774640
47 MB read/190 GB total/no deadline
New block 286931, basetarget 1620767
47 MB read/190 GB total/no deadline
New block 286932, basetarget 1666192
47 MB read/190 GB total/no deadline
New block 286933, basetarget 1745757
47 MB read/190 GB total/no deadline
New block 286934, basetarget 1949850
47 MB read/190 GB total/no deadline
New block 286935, basetarget 1958012
23 MB read/94 GB total/no deadline
Walet reported no deadline.

Dario's wallet

@ccminer Not submitting a single deadline in 5 days of continuous 200GB mining is very strange. So Linux miner... I don't know how it works, so I cannot told you if it is setted up correctly, but could be a corrupted plot problem. If so you need to replot and hope it's not an hardware problem eheh. Replot 200GB is not so hard for a medium pc...

RichBC

@Dario's-wallet 200GB is not much, which pool is being used?

Rich

Dario's wallet

@RichBC I don't know, but if this is his mining account he should mine at http://pool.burstcoin.party/...

LithStud

i mine at that pool :) you need to go http://pool.burstcoin.party:8124 (port number is a must)
dont remember seeing ccminer worker in the lists

RichBC

@Dario's-wallet Yes that looks right, so should be mining soothing in that time. Pool recommended plot size is 64GB.

@Dario's-wallet Does the wallet report any Deadlines found but not reported?

Rich

ccminer

@LithStud
indeed I'm using that pool but I do not even appear in the worker list. I thought because I found 0 deadlines so far.
am I correct?

RichBC

@ccminer I can't see you in the list, so no deadlines have been submitted. Reward Assignment looks ok, so something must be up with the Miner config?

Rich

LithStud

@ccminer probably. Does your miner give any information once started that it has connected to pool and so on? Also can you show your miners config file? (eg. Jminer has jminer.properties)

BTW with my measly 54GB i get there 0.5-2 bursts per day :) so it must be something wrong on your side either configuration or as @Dario-s-wallet mentioned you plot has gone to shit.

ccminer

@LithStud @RichBC I'm using dcct_miner for linux and there is not a miner.conf file to edit.
when I run the miner at the biginning I get an output like this:

Using pool.burstcoin.party port 8124
47 MB read/190 GB total/no deadline

LithStud

@ccminer ok so for all to be working it should be linke this

start mining command: ./mine_uray.sh [<plot directory>]

where mine_uray.sh would have:
#!/bin/sh
./mine_pool_all pool.burstcoin.party:8124 $@

or ./mine_dev_v1.sh [<plot directory>]
where mine_dev_v1.sh would have:
#!/bin/sh
./mine_pool_share pool.burstcoin.party:8124 $@

EDIT: Also forgot to mention that you need to synchronize you PC clock just in case (seen somewhere how to do that on linux but cant remember where)

ccminer

@LithStud Thank you a lot.

I'll try with the commands you just suggested I simply used:

./mine pool.burstcoin.party:8124 [plot directory]
maybe it was the mistake

about clock sync it should be sync already because I'm mining some POS coins with no issue, but I'll try to resync just in case..

LithStud

@ccminer well those are command i found on the forums (havent tried myself to use linux for mining yet) and changed pool addresses.

ccminer

@LithStud
nope even worst than before!

I get

Walet reported no deadline.

or

Could not get mining info from Node. Will retry..

LithStud

hmm strange indeed o_O ok i will have to look a bit more into that miner :) maybe there is newer posts about it

ccminer

@LithStud can you give me the link please

LithStud

@ccminer i just downloaded the miner itself :) and pulled those commands from bitcointalk forum.

btw keep in mind those sh files are in bin folder inside miner folder and there is same named files in miner folder as well (not sure why)