mining calculator precision

Dario's wallet

@ccminer Of course, mate, no probs, I'm glad to help you :)
A plot it's a file, and as a file can be corrupted by read/write errors, hardware/software problems, electrical issues, corrupted firmware...
In my case I had noticed that Runaurufu Burst Miner cannot read properly my 930GB plot in my 1TB HDD (not expected values), founding REALLY high deadlines (hundred thousand years). So I checked on Blago and it could not submit anything. Also I noticed that sometimes my other pc cannot detect it via sata, but it's always recognized through a usb adapter. In addition it's very slow and the speed measured by Blago it's not uniform for every block (±30%, two discrete values, 9MB/s or 12MB/s, usb 2.0), so it could...should be an hardware problem...sigh :(
Now it's on deep format, let's see what happens...

ccminer

@Dario's-wallet thank you again.

Can you send me the link of blago to check my plots as well. I have just 200 gb but can not find a single deadlines in days and days...

Dario's wallet

@ccminer Blago miner is one of the miner implemented in the all-in-one Burst wallet, that's the separate software link: http://forums.burst-team.us:4567/topic/64/blago-s-burst-miner-win. If you post some screenshot we could help you :)

ccminer

@Dario's-wallet is there a linux version?

Dario's wallet

@ccminer No, sorry...

Dario's wallet

@ccminer But it doesn't matter what miner are u using, every miner can provide you some informations...

ccminer

@Dario's-wallet

this is my output since at leat 5 days:

Walet reported no deadline.
47 MB read/190 GB total/no deadline
New block 286929, basetarget 1620552
47 MB read/190 GB total/no deadline
New block 286930, basetarget 1774640
47 MB read/190 GB total/no deadline
New block 286931, basetarget 1620767
47 MB read/190 GB total/no deadline
New block 286932, basetarget 1666192
47 MB read/190 GB total/no deadline
New block 286933, basetarget 1745757
47 MB read/190 GB total/no deadline
New block 286934, basetarget 1949850
47 MB read/190 GB total/no deadline
New block 286935, basetarget 1958012
23 MB read/94 GB total/no deadline
Walet reported no deadline.

Dario's wallet

@ccminer Not submitting a single deadline in 5 days of continuous 200GB mining is very strange. So Linux miner... I don't know how it works, so I cannot told you if it is setted up correctly, but could be a corrupted plot problem. If so you need to replot and hope it's not an hardware problem eheh. Replot 200GB is not so hard for a medium pc...

RichBC

@Dario's-wallet 200GB is not much, which pool is being used?

Rich

Dario's wallet

@RichBC I don't know, but if this is his mining account he should mine at http://pool.burstcoin.party/...

LithStud

i mine at that pool :) you need to go http://pool.burstcoin.party:8124 (port number is a must)
dont remember seeing ccminer worker in the lists

RichBC

@Dario's-wallet Yes that looks right, so should be mining soothing in that time. Pool recommended plot size is 64GB.

@Dario's-wallet Does the wallet report any Deadlines found but not reported?

Rich

ccminer

@LithStud
indeed I'm using that pool but I do not even appear in the worker list. I thought because I found 0 deadlines so far.
am I correct?

RichBC

@ccminer I can't see you in the list, so no deadlines have been submitted. Reward Assignment looks ok, so something must be up with the Miner config?

Rich

LithStud

@ccminer probably. Does your miner give any information once started that it has connected to pool and so on? Also can you show your miners config file? (eg. Jminer has jminer.properties)

BTW with my measly 54GB i get there 0.5-2 bursts per day :) so it must be something wrong on your side either configuration or as @Dario-s-wallet mentioned you plot has gone to shit.

ccminer

@LithStud @RichBC I'm using dcct_miner for linux and there is not a miner.conf file to edit.
when I run the miner at the biginning I get an output like this:

Using pool.burstcoin.party port 8124
47 MB read/190 GB total/no deadline

LithStud

@ccminer ok so for all to be working it should be linke this

start mining command: ./mine_uray.sh [<plot directory>]

where mine_uray.sh would have:
#!/bin/sh
./mine_pool_all pool.burstcoin.party:8124 $@

or ./mine_dev_v1.sh [<plot directory>]
where mine_dev_v1.sh would have:
#!/bin/sh
./mine_pool_share pool.burstcoin.party:8124 $@

EDIT: Also forgot to mention that you need to synchronize you PC clock just in case (seen somewhere how to do that on linux but cant remember where)

ccminer

@LithStud Thank you a lot.

I'll try with the commands you just suggested I simply used:

./mine pool.burstcoin.party:8124 [plot directory]
maybe it was the mistake

about clock sync it should be sync already because I'm mining some POS coins with no issue, but I'll try to resync just in case..

LithStud

@ccminer well those are command i found on the forums (havent tried myself to use linux for mining yet) and changed pool addresses.

ccminer

@LithStud
nope even worst than before!

I get

Walet reported no deadline.

or

Could not get mining info from Node. Will retry..