Posts made by natsaba
-
RE: GPU plotting stuckposted in Mining & Plotting
@cryo i couldn't find any read me or run.bat in gpuPlotGenerator-bin-win-x64-4.1.1.7z. How should i run and where i have to specify the plots and configs.
-
RE: GPU plotting stuckposted in Mining & Plotting
@cryo thanks, i will try and share the results here
-
RE: Relation between deadline and plot sizeposted in Mining & Plotting
@iKnow0 Thanks for the charts ,still i have lot of questions. First i will go through the white paper and come here with my questions. I am java developer and found the wallet is in java from github. Like to contribute for this project. Who is the best person to ask what is needed?
-
RE: Relation between deadline and plot sizeposted in Mining & Plotting
@IncludeBeer @iKnow0 thanks for the reply. is finding a deadline random?
or how the deadline is calculated/find by minners from my plot?I have done 8TB plot across multiple drives and am getting below readings.
is it normal or any issues in finding/reading deadline.I got 80sec for 6TB/non optimized in G drive.is it normal?
-
Relation between deadline and plot sizeposted in Mining & Plotting
I am new here and started couple weeks before and trying to understand how burst works.
In all the information in this forum and videos suggest to win a block; we need to have shorter deadline and bigger plots will give us shot dead lines.When i compare the pools the below pool had a entry and who has shorter deadlines with small capacity.
Eugueny has only around 2TB but got better deadline than ccminer who has around 800TB.
How is it possible? could any one of the gurus help me to understand whats happening here.
-
RE: GPU plotting stuckposted in Mining & Plotting
@vaxman Thanks. i will try to plot smaller once today.
here is my devices.txt setting.0 0 1024 128 8192
-
RE: GPU plotting stuckposted in Mining & Plotting
After leaving it for around 5 hours. the plot is zero byte and the plotter stayed with 0.75%.
-
RE: GPU plotting stuckposted in Mining & Plotting
After 4 hours to plot 500GB with GPU/direct. Nothing changing, still its stuck with 0.75%.
Any one could help me to identify what am doing wrong here.

-
RE: GPU plotting stuckposted in Mining & Plotting
@HiDevin I did change the stagger and size of the plot to know its working.
Now i have 500GB and stagger as 16384 in direct mode.Though the progress stuck at 0.75%, i see some activity in taskmanager for memory and disk.
So the current ETA which is stuck at same for 30 mins is 3h 16m 17s, your saying it would change once the plot is created and started filling right?

-
RE: GPU plotting stuckposted in Mining & Plotting
@HiDevin I have 12 GB RAM in CPU and what should be my stagger size, i will recalculate the plot details based on that.
-
RE: GPU plotting stuckposted in Mining & Plotting
@HiDevin thanks for the reply. I tried the buffer mode yesterday and the same result. i see GPU load as 1% and doubted its stopped. The percentage is not changed even after around 12 hours.
-
GPU plotting stuckposted in Mining & Plotting
I been trying to plot a 4TB of my 8TB drive.
Its starting every time but stuck at 0.19% and nothing happens even after 12 hours.
I tried multiple time and it stuck at same percentage.
Its been two days i am trying to plot a TB but no success.
NO CPU or GPU is running. Please help me for my first GPU plotting.
I am very new to this GPU and can i use my intel GPU in my laptop. -
RE: My 1/2 PetaByteposted in System Builds and other hardware stuff.
@ChuckNorris Wow, that's beauty !! What Hard disks you have chosen for this? we know you would be busy, if you could get some time give us some more info on machine and HDD setup.
-
[ERROR 1004] Your Burst account's reward recipientposted in Mining & Plotting
I am getting this error when i started mining. Please help to identify the issue.
Pool address: BURST-PHJ5-JMZP-3EQQ-EAA2BPool config below,
{
"Mode" : "pool",
"Server" : "pool.burstcoin.party",
"Port" : 8124,"UpdaterAddr" : "pool.burstcoin.party",
"UpdaterPort" : 8124,"InfoAddr" : "pool.burstcoin.party",
"InfoPort" : 8124,"EnableProxy" : false,
"ProxyPort" : 8126,"Paths":
[
"E:\Burst\plots"
],
"CacheSize" : 100000,
"ShowMsg" : false,
"ShowUpdates" : false,"Debug" : true,
"SendBestOnly" : true,
"TargetDeadline": 6048000,"UseFastRcv" : false,
"SendInterval" : 100,
"UpdateInterval" : 950,"UseLog" : true,
"ShowWinner" : false,
"UseBoost" : false,"WinSizeX" : 80,
"WinSizeY" : 60
} -
RE: hey I m a new userposted in Welcome
Hi, i am new for burst and after i have plotted my 500GB hard drive and clicked start mining, its asking for minimum of 1 burst to change the reward mining address but i have zero burst.
Please help me to get started and send 1 burst to get me started.BURST-JHZZ-3PD4-FCUU-EWZPV





