@haitch
Team US and .Biz both don't work.
Posts made by Lokken86
-
Miner won't start.posted in Help & Support
hi,
i'm trying to switch pools to one of the pool.burst pools and it doesn't do anything when I start mining. Usually the deadlines start appearing straight away. Anyone else having this issue? Everything works fine on some other pools but not these.
-
RE: Too many not comfirmed DL?posted in Help & Support
@haitch I did have to use the plot checker to correct a mismatch error. Could that have something to do with it?
I set up the plotter with "gpuPlotGenerator generate buffer d:\13723927528809126043_0_19000544_4096" and got name/size mismatch but that went away once I use plot checker.
-
RE: Too many not comfirmed DL?posted in Help & Support
@haitch I'm mining at http://pool.burst-team.us/ with 5TB.
-
RE: Too many not comfirmed DL?posted in Help & Support
@Hect0r Thanks for the response. So not an error on my part then?
-
Too many not comfirmed DL?posted in Help & Support
Sorry for all these questions I do appreciate the help.
Can someone tell me from this screenshot if everything looks ok. I just got this up and running but seems a lot of Dl's are going unconfirmed which I can only assume is bad.
-
RE: Question on Plottingposted in Help & Support
@haitch Think I might just see how it goes and use the optimiser after if it isn't working out. I'm planning on a new system anyway which may keep things tight as is.
-
RE: Question on Plottingposted in Help & Support
@haitch Wasn't aware of this. How much would it effect me long term? It is on an AMD Fury pro.
-
RE: Question on Plottingposted in Help & Support
@haitch I've decided to switch to a gpu plotter. Had to turn off a gpu for eth mining but it tells me how far complete it is and plots at 30,000 per/s. Much better.
-
Question on Plottingposted in Help & Support
Hi again.
I am using wallet v0.3.9 and trying to plot my drive. When I begin, no matter how much of the drive I select, it instantly fills up the hard drive with that amount. So if I stop the plotter for whatever reason it acts as if it is fully complete i.e if I start with a blank 5TB drive and select plot and then stop after 10seconds it will use up all 5TB and mining will commence assuming everything went well.
The problem is the plotter does not tell me what percentage of the plotting has been completed, only how many nonces. -
RE: Please help a noobposted in Help & Support
@pr0cesor Haha. What a moron I am. Not sure what went wrong here tbh but at least I know now.
Thanks for the help.
-
RE: Please help a noobposted in Help & Support
@haitch So what would be the most effective way to sort the problem? Will I have to start over?
-
RE: Please help a noobposted in Help & Support
@pr0cesor I've had it running for almost 2 days and nothing is happening. I got charged the 1 burst to change my address. It wouldn't have charged if I hadn't done this right surely?
Also I don't even know where the address BURST-HSWB-WHUP-M6TD-BAPM5 even came from. It isn't one of the options from the drop box in my wallet...
-
RE: Please help a noobposted in Help & Support
@pr0cesor That's what I'm saying though. As far as I am aware that's what I am doing. The picture at the top shows the transaction for when I changed the address for the pool address.
-
RE: Please help a noobposted in Help & Support
This is the error I am getting. Like it's the complete wrong address I'm using but it has been changed twice to match the one on burst us website.
I am mining on a 5Tb drive.
I have also updated the other picture to be more clear.
-
RE: Please help a noobposted in Help & Support
@haitch will do. Not sure why it's showing up so blurry though . .
-
RE: Please help a noobposted in Help & Support
Yea that's the pool I am mining. Do you want a picture of the miner in action?



