@haitch kk, ty for the fast response. Almost have 3 more 4TB plotted and 6 more to go after.
Posts made by Jason83
-
RE: New error I am running intoposted in Help & Support
-
RE: New error I am running intoposted in Help & Support
@haitch said in New error I am running into:
miner.conf
Mining on burst-team.us
Minter.Conf file (I have not edited this, never thought to, any advice would be awesome):
{
"Mode" : "pool",
"Server" : "pool.burst-team.us",
"Port" : 8124,"UpdaterAddr" : "pool.burst-team.us",
"UpdaterPort" : 8124,"InfoAddr" : "pool.burst-team.us",
"InfoPort" : 8124,"EnableProxy" : false,
"ProxyPort" : 8126,"Paths":
[
"O:\Burst\plots","N:\Burst\plots","M:\Burst\plots","L:\Burst\plots","K:\Burst\plots","J:\Burst\plots","I:\Burst\plots","H:\Burst\plots","G:\Burst\plots","F:\Burst\plots"
],
"CacheSize" : 40000,
"ShowMsg" : false,
"ShowUpdates" : false,"Debug" : true,
"UseHDDWakeUp" : false,"SendBestOnly" : true,
"TargetDeadline": 80000000,"UseFastRcv" : false,
"SendInterval" : 100,
"UpdateInterval" : 950,"UseLog" : false,
"ShowWinner" : true,
"UseBoost" : false,"WinSizeX" : 76,
"WinSizeY" : 60
} -
New error I am running intoposted in Help & Support
I never seem to get the found, sent, confirmed anymore, always get one of the 2 below. What are these? And is this like a confirm or should I just replot? I am at 9TB out of 44.5TB ploted so that is why I am asking, rather start over now instead of after all of them lol, ploting takes forever lol!
14:29:43 New block 373216, baseTarget 364387, netDiff 50290 Tb
14:29:45 Thread "H:\Burst\plots" @ 2.0 sec (58.5 MB/s) CPU 34.31%
14:29:46 [ 6362941140589198673] found DL: 414522
14:29:46 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:29:51 Thread "I:\Burst\plots" @ 7.6 sec (33.0 MB/s) CPU 18.61%
14:29:55 Thread "K:\Burst\plots" @ 11.8 sec (78.6 MB/s) CPU 43.42%
14:29:55 Thread "J:\Burst\plots" @ 12.1 sec (77.0 MB/s) CPU 42.78%
14:30:47 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:50 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:51 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:52 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:52 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:56 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:56 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:57 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:58 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:58 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:59 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:31:59 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:32:00 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:32:01 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:32:01 [ 6362941140589198673] sent DL: 414522 4d 19:08:42
14:32:02 [ 6362941140589198673] sent DL: 414522 4d 19:08:42or I get this:
14:34:37 New block 373219, baseTarget 320975, netDiff 57092 Tb
14:34:39 Thread "H:\Burst\plots" @ 2.1 sec (56.3 MB/s) CPU 39.73%
14:34:46 Thread "I:\Burst\plots" @ 8.5 sec (29.3 MB/s) CPU 18.97%
14:34:49 Thread "J:\Burst\plots" @ 12.3 sec (75.4 MB/s) CPU 48.05%
14:34:49 Thread "K:\Burst\plots" @ 12.4 sec (75.4 MB/s) CPU 48.36%
WINNER: Get info failed: 10054or this:
16:00:45 New block 373238, baseTarget 393350, netDiff 46587 Tb
16:00:47 Thread "H:\Burst\plots" @ 2.0 sec (58.7 MB/s) CPU 38.14%
16:00:49 [ 6362941140589198673] found DL: 16443
16:00:49 [ 6362941140589198673] sent DL: 16443 0d 04:34:03
16:00:53 Thread "I:\Burst\plots" @ 7.9 sec (31.6 MB/s) CPU 20.53%
16:00:57 Thread "K:\Burst\plots" @ 11.6 sec (80.0 MB/s) CPU 51.48%
16:00:57 Thread "J:\Burst\plots" @ 11.7 sec (79.4 MB/s) CPU 50.70%no confirm^
EDIT: so I did get a found, sent confirmed. Just did, but what are the above stuff?
-
RE: Burst Miner Network quality issueposted in Help & Support
Thank you for all the replies! Great community :)
Sorry to hear about the attacks, I will be patient, hope things get better!
-
RE: Burst Miner Network quality issueposted in Help & Support
Thank you for the response everyone. So any pools not under attack? Or would anyone recommend a smaller pool maybe? Once I am done plotting (been GPU plotting and then optimizing 2 4TB drives ever 2 days) so I will have 11 4TB and 1 500gb drive when done any smaller pool not under attack better for this set up?
Still having this issues on pool.burst-team.us and pool.burstcoin.biz this morning.
-
Burst Miner Network quality issueposted in Help & Support
Burst Miner Network quality starts at 100% but slowly drops to 0%. Does anyone know what is causing this? It happens on pool.burst-team.us and pool.burstcoin.biz.
I have been plotting 11 4TB hard drives and I have 2 running on it right now and noticed after one day I still am getting no deadlines ever, I saw that my Network Quality is 0% and feel this is the issue cause my read times are good. Any ideas on why this is happening? Everything I read blames the pool, but 2 pools same issue so I think it is something on my side, this is a new PC as well, all drivers are up to date.
BURST miner, v1.170603_AVX2
Programming: dcct (Linux) & Blago (Windows)
CPU support: AES SSE SSE2 SSE3 SSE4.2 AVX AVX2 [recomend use AVX2]
GenuineIntel Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz [8 cores]
RAM: 16384 Mb
Pool address pool.burst-team.us (ip 216.165.179.45:8124)
Updater address pool.burst-team.us (ip 216.165.179.45:8124)
Using plots:
K:\Burst\plots files: 1 size: 3628 Gb
J:\Burst\plots files: 1 size: 3628 Gb
I:\Burst\plots files: 2 size: 997 Gb
H:\Burst\plots files: 1 size: 465 Gb
TOTAL: 8719 Gb23:27:54 New block 372277, baseTarget 320952, netDiff 57096 Tb
23:27:56 Thread "H:\Burst\plots" @ 2.3 sec (49.7 MB/s) CPU 25.05%
23:28:02 Thread "I:\Burst\plots" @ 8.7 sec (28.8 MB/s) CPU 13.91%
23:28:06 Thread "J:\Burst\plots" @ 11.9 sec (76.2 MB/s) CPU 36.51%
23:28:06 Thread "K:\Burst\plots" @ 11.9 sec (76.1 MB/s) CPU 36.21%┌──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│100% 8719 GB (182.69 MB/s). no deadline Network quality: 0% -
RE: Need help with GPU plottingposted in Help & Support
@haitch Thank you! I am currently re-plotting the drives. When it completed I didn't see any errors last time, but I will pay closer attention this time lol.
-
RE: Need help with GPU plottingposted in Help & Support
I think I just fixed it, for some reason it is naming my pots in an odd way that the miner + the checker cannot understand. I changed the names an re-ran the checker and this is the results:
C:>plotschecker g:\Burst\plots
file: 6362941140589198673_14860288_14860288_16384 renamed to 6362941140589198673_14860288_14843904_16384
file: 6362941140589198673_14860288_14843904_16384 truncated to 3891240370176 bytesC:>plotschecker f:\Burst\plots
file: 6362941140589198673_0_14860288_16384 renamed to 6362941140589198673_0_14843904_16384
file: 6362941140589198673_0_14843904_16384 truncated to 3891240370176 bytesEDIT: Yes this did fix it, I was able to start mining now without error but @36 sec so kinda slow for plotting in direct mode (should have optimized and plotted). So I am optimizing the plot files now, should I just not use direct mode as it is not working? Is the other way faster?
-
RE: Need help with GPU plottingposted in Help & Support
I just tried again, here are the results:
C:\Users\Jason>cd ..
C:\Users>cd ..
C:>plotschecker f:\Burst\plots
file: 6362941140589198673_0_14860288_14860288_16384 need to delete and replot
C:>plotschecker g:\Burst\plotsfile: 6362941140589198673_14860288_14860288_14860288 need to delete and replot
So it seems I need to delete them, and that is no biggie, I just want to see what I did wrong with my .bat files that would have caused this issue to when I hit plot again today I do not get the same issue.
-
RE: Need help with GPU plottingposted in Help & Support
@iKnow0 no I changed the plot to the Burst\plots folder (just didn't have that in the bat file) - this was my first issue getting plot checker to work and the miner to see the plots but I have fixed that.
-
RE: Need help with GPU plottingposted in Help & Support
Ok just rewrote my bat files but I still feel I will get the same error. Can someone please check these and offer advice as to why this would give name/size missmatch and what needs changed or was is just a bad plot session that I should just try again and it should be fine.
gpuPlotGenerator generate direct F://Burst/plots/6362941140589198673_0_15208704_16384
pausegpuPlotGenerator generate direct G://Burst/plots/6362941140589198673_15208704_15208704_16384
pausegpuPlotGenerator generate direct H://Burst/plots/6362941140589198673_30068993_15208704_16384
pausegpuPlotGenerator generate direct I://Burst/plots/6362941140589198673_44929281_15208704_16384
pausegpuPlotGenerator generate direct J://Burst/plots/6362941140589198673_59789569_15208704_16384
pausegpuPlotGenerator generate direct K://Burst/plots/6362941140589198673_74649857_15208704_16384
pausegpuPlotGenerator generate direct L://Burst/plots/6362941140589198673_89510145_15208704_16384
pausegpuPlotGenerator generate direct M://Burst/plots/6362941140589198673_104370433_15208704_16384
pausegpuPlotGenerator generate direct N://Burst/plots/6362941140589198673_119230721_15208704_16384
pausegpuPlotGenerator generate direct O://Burst/plots/6362941140589198673_ 134091009_15208704_16384
pausegpuPlotGenerator generate direct P://Burst/plots/6362941140589198673_148951297_15208704_16384
pause -
Need help with GPU plottingposted in Help & Support
I am getting the name/size missmatch error when I try to mine. I used plot checker and it says I need to delete and replot.
file: 6362941140589198673_0_14860288_14860288 need to delete and replot
C:\Users\Jason>c:\PlotsChecker G:\Burst\plotsfile: 6362941140589198673_14860288_14860288_14860288 need to delete and replot
C:\Users\Jason>c:\PlotsChecker G:\Burst\plotsSo my question is, what did I do wrong? I will paste my GPU plot bat files below that I am using to do this, I am very new to Burstcoin and was able to plot mine with the AIO wallet but I just got 11 4TB hard drives and the AIO wallet is to slow to plot them, I just used GPU and got 2x4TB drives done in 14hrs.
Here are my .bat files. I need to change them a bit as well cause it left 98GB of free space on each so I will have to make this: 14860288 more like this: 15208704 but what else is wrong with the below? Why am I getting name/size missmatch and need to delete and replot.
gpuPlotGenerator generate direct F://plots/6362941140589198673_0_14860288_16384
pausegpuPlotGenerator generate direct G://plots/6362941140589198673_14860288_14860288_16384
pausegpuPlotGenerator generate direct H://plots/6362941140589198673_29720577_14860288_16384
pausegpuPlotGenerator generate direct I://plots/6362941140589198673_44580865_14860288_16384
pauseEDIT: Might help if I show the error:
GenuineIntel Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz [8 cores]
RAM: 16384 Mb
Pool address pool.burst-team.us (ip 216.165.179.45:8124)
Updater address pool.burst-team.us (ip 216.165.179.45:8124)
Using plots:
G:\Burst\plots files: 1 size: 3627 Gb
F:\Burst\plots files: 1 size: 3627 Gb
TOTAL: 7254 Gb12:43:17 New block 371045, baseTarget 321556, netDiff 56989 Tb
file "6362941140589198673_14860288_14860288_14860288" name/size mismatch
file "6362941140589198673_0_14860288_14860288_16384" name/size mismatch
12:43:28 Thread "F:\Burst\plots" @ 11.2 sec (81.2 MB/s) CPU 52.60%
12:43:29 Thread "G:\Burst\plots" @ 11.6 sec (78.4 MB/s) CPU 51.72%