Got it, :)

@vExact thats what it was, I removed -d64 And it works, but now im getting
2017-06-28 20:55:22.485 ERROR 10964 --- [ main] burstcoin.jminer.core.CoreProperties : Error: property 'poolServer' is required for pool-mining!
2017-06-28 20:55:22.485 ERROR 10964 --- [ main] burstcoin.jminer.core.CoreProperties : Error: property 'numericAccountId' is required for pool-mining!
2017-06-28 20:55:22.485 ERROR 10964 --- [ main] burstcoin.jminer.core.network.Network : init pool network failed!
2017-06-28 20:55:22.485 ERROR 10964 --- [ main] burstcoin.jminer.core.network.Network : jminer.properties: 'poolServer' or 'numericAccountId' is missing?!
2017-06-28 20:55:22.503 ERROR 10964 --- [ main] burstcoin.jminer.core.CoreProperties : Error: property 'numericAccountId' is required for pool-mining!
2017-06-28 20:55:22.503 ERROR 10964 --- [ main] burstcoin.jminer.core.reader.Reader : init reader failed!
2017-06-28 20:55:22.504 ERROR 10964 --- [ main] burstcoin.jminer.core.CoreProperties : Error: property 'plotPaths' required!

So now i gotta go through and double check my settings and see what i may of may not of missed

Alright So I need a Little bit of help, Im using Jminer, Im pretty sure i have it set up right, I do have everything installed that is required, java, OpenCL etc.. When i run the Start.bat It opens for a Nano Second and Closes, No Errors displayed, No log Files * even though i have it set to write the Log Files* nothing,

am i missing something?
here is the config/properties file,

https://pastebin.com/Kp1JwT1S

Im using a gtx 1050TI 4gb Edition

@haitch said in Errir SetFilePointerex:

@cody0520 I doubt it. the 87 error is an access/permissions error - either you don't have rights to access the file, or some other process has locked it.Exclude the dir in you AV, use Resource Manager to try and finf the process using the file.

No AV is being used on the system, And the Entire Hard Drive and Files inside HardDrive have Full Access.

@haitch said in Errir SetFilePointerex:

@cody0520 I was helping another member with a code 87 error a couple of days ago - turned out to be having Compress Files enabled in the folder the plot was being created in.

Just took a Look at the drive, and the folder Neither one have compress method enabled :/

I do have a BurstWallet Folder in the same Hard Drive, Think that could cause a conflict?

error SetFilePointerEx. code = 87
error SetFilePointerEx. code = 87
error SetFilePointerEx. code = 87
error SetFilePointerEx. code = 87
error SetFilePointerEx. code = 87
error SetFilePointerEx. code = 87
error ReadFile. code = 87
Unexpected end of file xxxxxxxxxxxxxxxxx_500000001_1920500_19205

Hello This is the error Im getting after Plotting roughly 500Gb using my GPU, This makes 2 times this has happened so far, Once with my GPU * GTX 1050TI 4gb* and once with my CPU plotter * I5 2500 *

Here is the setup im using for GPU

gpuPlotGenerator generate buffer E:\Burst\Plots\xxxxxxxxxxxxxxxxxxx_500000001_1920500_19205

But When I try the CPU method both the 3rd Set of Numbers and 4th set of numbers are the same, but when i use my GPU Plotter with the exact same set of numbers for 3rd set and 4th set, it throws some kind of error and closes instantly. But with the CPU Plotter It has no problems

@haitch Awesome thank you! Ill give that a shot and see if that does the trick ;)

Guess I need to Read up on the GPU plotter Config i got a 1TB SSD i wanna Plot, but with CPU i think it may take some time to actually do lol

EDIT: I found it Was overlooking it the entire time lol

Hello, So Im having a Issue thats is getting fairly annoying, Every time I shut down/restart the BurstCoin wallet program, It has to redownload the entire DB of transactions, I have downloaded it 4 times in the past week alone, and it takes roughly 24-36Hrs each time, This is preventing me from actually mining or anything else.

The program im using, Is having major issues as well, Constantly Stops responding, When i swap between online Wallet or Local wallet, the program crashes, The Plotter for GPU doesnt work, And CPU takes ages lol.

What is going on here, Could someone recommend a Better Wallet Program or something? Please lol That or tell me how to fix this problem
Thank you! :)

@haitch hey! awesome That worked! Now, when i try openCL it just crashes instantly, but when i use CPU it doesnt, Where does the Error logs save so i know why it keeps crashing my GPU is tons stronger then CPU ever will be lololol

Thanks for the Help!

@haitch Tried again a few moments ago, and it still can not connect to the pool :/

The Pool im using is pool.burst-team.us:8020