@sevencardz Yeah. Totally man. I Abandoned jminer as i was getting out of resource errors with 32gb or ram. Blago is just faster anyways. Looks a little better too. I'm able to scan 250tb in 60 seconds with OPTIMIZED plots. I'm sure that will be reduced to 40 seconds when i'm done optimizing. I don't think it's worth too much effort to improve it much farther. I get an average read of 1000mb/s with 7 drives per hub. Not too bad if you ask me.
Posts made by ChuckNorris
-
RE: Still have memory issues wit Jminer, Help Chuckposted in Mining & Plotting
-
RE: Still have memory issues wit Jminer, Help Chuckposted in Mining & Plotting
@luxe Thanks Luxe, Your the man around here. Forgot about java command for more memory. I think i'm going to stick with Blago for right now. I get better speeds with it. I'm also using gtx 1070 per machine for jminer. so def shouldn't be to weak. Tried the render thread option but reduces my speed too much.
-
RE: Still have memory issues wit Jminer, Help Chuckposted in Mining & Plotting
@ChuckNorris CRAZY!. And THANK YOU. I actually get better speeds. lmao. 1100mb/s instead of 900mb/s. I'm sure that will solve my memory problems as well. Let me tip you. What's your burst address. I'll send you 1000 burst. My read speed went from 100 seconds to 64 seconds. I didn't think blago would be that fast. Now i need to setup for solo mining
-
RE: Still have memory issues wit Jminer, Help Chuckposted in Mining & Plotting
@sevencardz Hmm. i'll give it a try and report back. So blago must be a parallel scanning miner too than.
-
RE: Still have memory issues wit Jminer, Help Chuckposted in Mining & Plotting
@sevencardz What's his read times.
So far i'm reading 250tb in 80 seconds with unoptimized plots. (Yes i'll be optimizing them) -
RE: Still have memory issues wit Jminer, Help Chuckposted in Mining & Plotting
@Daforce Windows 10 home 64 bit
-
Still have memory issues wit Jminer, Help Chuckposted in Mining & Plotting
I'm still getting memory errors with Jminer. Saying i ran out of resources.
I get this message on a lot of drives and then it kills the miner and stops mining.
IOException in: C:\MountPoints\2-28\burst\plots\12753280106257581144_2800000000_30400000_10000 -> Insufficient system resources exist to complete the requested service
I have 32gb of ram now. Adjusted chuck nounces.
Even running O&O clever cache. Which keeps the ram usuage under control but still errors out within a few hours -
RE: Updates on my Half a petaposted in Mining & Plotting
@rds Thank you so much. That was the formula i was looking for. I just tried your number. And my usuage is now 24gb of ram of my 32gb. That just might do the trick. i think i've also heard once i optimize these drives the memory usage will also be reduced.
-
RE: Updates on my Half a petaposted in Mining & Plotting
@vExact Which direction do i go? i've tried 320000 160000 960000 The higher the number it saves memory? and it goes to go in additions of 160000 at a time?
-
Updates on my Half a petaposted in Mining & Plotting
Upgraded from kaby i5 to i7 on both of my units. Also upgraded from 16gb to 32gb ram
Old read speeds up to 600mb
Curent read speeds 900mb.
Helped quite a bit. So i'm reading 250tb in 90 seconds or less now with un optimized plots. (optimizing now)
Question and problem
My Jminer eventually errors out because not enough resources. And kills the miner. Also get the windows notification.
Jminer uses all 32gb of my ram now. How can i solve this memory problem? -
RE: What pool should i use for my half petaposted in Mining & Plotting
@luxe i know you use jminer. What are the few settings i have to change. Could u post or pm your jminer settings pretty please. As you also have 300+ tb's i imagine you solo mine yourself?
-
RE: HighRoller Pool - The Pool for **BIG** Miners.posted in Pool Announcements
@iKnow0 Ohh i see. I just took a look at pool setup. Still looks like a lot of work. I'd rather pay small fee to pool mine. Or solo. i just need to take a min to figure out solo setup.
-
RE: HighRoller Pool - The Pool for **BIG** Miners.posted in Pool Announcements
@iKnow0 Sounds great and all. But sounds like a lot of work. I'm very busy managing farms right now. I don't have time to do payouts and all of that jazz
-
RE: HighRoller Pool - The Pool for **BIG** Miners.posted in Pool Announcements
@manfromafar Any guides to setup solo mining?
With jminer -
RE: HighRoller Pool - The Pool for **BIG** Miners.posted in Pool Announcements
So solo mining is at least 5 percent more profitable. Depending how lucky you are?
Do i just set local in jminer settings instead? the 127.0.0.1 or whatever it is? Do i also have to have the wallet open at all timeS? -
RE: What pool should i use for my half petaposted in Mining & Plotting
Someone give me a crash course on solo mining? I only get paid when i find a whole block right? How often would i be likely to see payments?
-
What pool should i use for my half petaposted in Mining & Plotting
I have 2 250tb rigs running. I'm on pool.burst-team.us now.
Which pool would be best for my my larger than normal farm. -
RE: Filled up half a PetaByte. Now What?posted in Mining & Plotting
@sevencardz Damn. Didn't even think about just unplugging a few drives from each row. Simple bottlekneck check. I'm getting 650mb/s with 7 drives per hub. I tried just 3 drives per hub. Same exact result actually. Something is bottleknecking me some. My gtx 1070 only gets 20 percent usuage or less when jminer counting.
A hub can handle at least 5 drives without a bottlekneck -
RE: Filled up half a PetaByte. Now What?posted in Mining & Plotting
@BeholdMiNuggets amds are garbage. I plot and count with gpus
-
RE: Filled up half a PetaByte. Now What?posted in Mining & Plotting
@illuminatus excuse me. Do you have a half peta setup. And no. Your wrong. If I plotted optimized plots off the bat. I only get 5000 nounces because they are SMR drives. Instead. I can buffer two drives at once and get 28000 nounces per drive. So for me to be able to fill up half a Peta in under 2 weeks. So I can start mining right away. I still get read times of 90 seconds with un optimized plots. Which is still pretty decent. Don't make me get my homies to back me up. Maybe do your research before insulting people.