Blago's Burst-Miner (Win)
-
@haitch thanks, found error
@Njcfamily31907 you write everywhere "port", but need "UpdaterPort"
{ "Mode" : "pool", "Server" : "216.165.179.44", "Port" : 6080, "UpdaterAddr" : "216.165.179.44", "UpdaterPort": 6080, "InfoAddr" : "216.165.179.44", "InfoPort": 6080, "EnableProxy" : false, "ProxyPort" : 8126, "Paths": [ "I:\\plots" ], "CacheSize" : 100000, "ShowMsg" : false, "ShowUpdates" : false, "Debug" : true, "SendBestOnly" : true, "TargetDeadline": 4000000, "UseFastRcv" : false, "SendInterval" : 100, "UpdateInterval" : 950, "UseLog" : true, "ShowWinner" : true, "UseBoost" : false, "WinSizeX" : 80, "WinSizeY" : 60 }works
-
@Blago I have been running mining tests on multiple Pools and I get a number of "Not Confirmed", busy Pools worse than others. If I restart the miner the deadline is always confirmed as the Pool is then less busy.
I know that a lot of the problem is my poor and variable internet connection, but I wondered if it would be possible to add a retry parameter? Perhaps just at the end of the scan for the best Deadline?
Thanks
Rich
-
@RichBC Good idea - I like it. @Blago - would it be possible to a resubmit of the best deadline the miner found if it hasn't been confirmed ?
-
@haitch I will make it, but try confirm few times (miner can enter to endless cycle)
-
@Blago Retry limit parameter ?
-
@Blago I think a single retry would probably fix things for most people? But to make it safe & univerasl a parrameter for number of retries and retry delay would be perfect.
Rich
-
Hello every body
I want to know with miner-burst I have to launch because there are different versus of software:
miner-v1.160705
miner-v1.160705_AVX
miner-v1.160705_AVX_amd
miner-v1.160705_AVX_i64I have a AMD Fx'tm)8350 Eight Core Processor with 16Go of RAM mémory installed and a windows 10 64 bits for 64bits core processsor.
I do not know what to launch exactly.
Thank you in advance for your answer and your participation
-
@Neo38 with an 8350 you can run miner-v1.160705_AVX_amd
-
Ok thanks Haitch
Thanks for your reactivity
And i have place this information on miner.conf
{
"Mode" : "pool",
"Server" : "burst.ninja",
"Port" : 8124,"UpdaterAddr" : "burst.ninja",
"UpdaterPort" : 8124,"InfoAddr" : "burst.ninja",
"InfoPort" : 8124,"EnableProxy" : false,
"ProxyPort" : 8126,"Paths":
[
"D:\Burst\plots"
],
"CacheSize" : 100000,
"ShowMsg" : false,
"ShowUpdates" : false,"Debug" : true,
"SendBestOnly" : true,
"TargetDeadline": 6048000,"UseFastRcv" : false,
"SendInterval" : 100,
"UpdateInterval" : 950,"UseLog" : true,
"ShowWinner" : false,
"UseBoost" : false,"WinSizeX" : 80,
"WinSizeY" : 60
}Is for you all is good level of parameters to mine on burst.ninja
Thanks in avance
-
@Neo38 as long as you have you reward assignment set to burst.ninja, it's good. But how many TB do you have in your plot? Ninja has a short deadline limit - without a lot of TB you'll miss out on a lot of blocks.
-
I don't arrive to mine on burst.ninja for the moment.
I have just 965Go but i will pass at 5TB tommorrow.
It is normaly what is the short deadline limit, on this pool?
With 5TB you advise me to undermine on which pool ?
Soon
-
@Neo38 Hey, have a look at the "recommended plot size" column here to choose a pool that suits you : https://docs.google.com/spreadsheets/d/1KHu9BWwy_QXIYAx2m_Tzs9BqPoTYUDhEDbHihZEXGsE/edit#gid=81124645
-
Ok thanks Haitch for the differents detail of the pools.
Good document
Soon
-
Any way to get a resubmit if the pool doesn't confirm the DL?
-
@gecox22 I think how it realise without problems when pool is fully down
-
@Blago maybe make it so it resubmits any that have failed one more time (or configurable in the config) when it finishing mining the plots on that round..
i think i saw creeps fork of urays miner do resubmissions.
whats annoying is 9 times out of 10 the pool has accepted the block, its just not reported it back.
-
@Blago
wit this error is working now?? and what i should do to fix it edit plot?? or i must plot new??
-
@adams can you post the plot's filename? That is definitely not working
-
@k.coins
xxxxxx_1300000001_30464517_699
-
@adams replot it. stagger must be multiple of nonces and 8 (or use XPlotter or GPU-plotter in direct mode)




