Creepminer illegal instruction
-
@Creepsky45 Okay so I compiled it, it is running now, I just have to wait and see if I submit any deadlines. Just to make sure, normal operation will just output last block winner, and how long it takes to read plotfiles until it finds a deadline right?
-
@Xander52 as they told you you have to compile it by your self.
reading plots speed depends on your hard drive reading speed. and connection usb 2.. usb 3.. sata.. and many other factors.. finding a deadline is not a must on each block .. some blocks you may not find a deadline at all, thats normal.happy mining :).
-
@zack Cool. After letting it run for a while it found some deadlines. I only have 3tb at the moment so I don't find the most deadlines right now. I have sata drives and it reads them in about 15.5 sec (1tb drive takes 9.9 sec, 2tb drive takes 15.5 sec)
-
@Xander52 Sounds good enough for now .. make sure to upgrade for better deadlines. ;)
-
@zack Yeah I think the computer could be a limiting factor (it has only a dual core athlon 64 and 3gb ram) Also the sata may be sata 1 or 2 so that could be slowing it down
-
@Xander52 i can see that you hard reading speed .. is more than perfect ..
mining doesn't require a great cpu .. a dual core would be more than enough.you only need to upgrade capacity for more and more deadlines :)
-
@zack Ahh okay I thought you meant my read speed needed to be upgraded. I have another 1tb plotting right now, and I got 2 more tb yesterday so I should be able to double my capacity.
-
@Xander52 wishing you best luck .. i know plotting is the worst part.. but remember its a one time process.
happy mining ;)
-
@zack @Creepsky45 Now after I added the third drive, when it scans the drives it scans the second one instantly and says that there are no plotfiles on it, why is this? I can browse to the plots folder and see that there is a plot there, so I do not know why it does not see it.
-
@Xander52 what does it say? should be something like read dir ... (1 file, x tb) in ... seconds.
Do you get a message on start that say that a plot file was skipped because it is invalid? (in red letters)
-
@Creepsky45 It says "Dir /home/xander52/BurstDrives/2/Plots read (0 files, 0.00 MB total) in 0.000s (~0.00 MB/s)"
-
@Xander52 And on start of the miner, does it say something like Found an invalid plotfile, skipping it?
-
@Creepsky45 It says "Plot file/dir does not exist '/home/xander52/BurstDrives/2/Plots' "
-
@Xander52 is the dir mounted properly? seems like there is a problem with it.
-
@Creepsky45 Yeah I have a bash script that does all my startup tasks for me(like mounting those drives where I need them), and I have not changed it. That drive was working and mining, and now with the third drive added that seems to have changed something somehow
-
@Creepsky45 Any ideas of what else could be wrong?
-
@Xander52 Plot file/dir does not exist means the miner cant access it... so I would first assure that it is mounted like it should be. Did you try to add your drive to /etc/fstab?
-
@Creepsky45 Before I added the third drive, the second drive was working fine, and the mounting is handled by a bash script that I made that mounts all my drives at once, the bash script has not changed at all so the mounting is fine.

