GPU plot generator v4.1.1 (Win/Linux)
-
@ccminer Yes that helps a lot. I am working through the numbers and mine are similar to yours.
Did you manually place a folder on your drive and is the path at ./gpu... generate to that file?
Thanks
-
@vadirthedark Nope I'm using an external HD, so I just command the plotter to create the plot file there
-
@ccminer Error message, this is what I input:
0 0 10000 256 8192 (devices.txt)
imbota@rpi:~/Downloads/crypto/burstcoin$ ./gpuPlotGenerator generate buffer /media/imbota/burst/65........................._0_19075000_68125
message:
GPU plot generator v4.0.3
Author: Cryo
Bitcoin: 138gMBhCrNkbaiTCmUhP9HLU9xwn5QKZgD
Burst: BURST-YA29-QCEW-QXC3-BKXDLLoading platforms...
Loading devices...
Loading devices configurations...[ERROR] Invalid parameters count at line [1]
I have adjusted devices.txt numbers and the generate line, with no success. I even tried your numbers with no success. I'm thinking my path call may be where the problem lies.
-
@vadirthedark
mmmm in the devices.txt there must be just the numbers you wrote, nothing more than that!
So be sure you didn't accidentaly pushed a space or the enter button, than save again
-
@ccminer Getting closer :)
Received this after I checked devices.txt:Loading platforms...
Loading devices...
Loading devices configurations...
Initializing generation devices...
[0] Device: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (OpenCL 1.2 AMD-APP (1445.5))
[0] Device memory: 2GB 452MB
[0] CPU memory: 2GB 452MB
Initializing generation contexts...[ERROR] Unable to open plots file
-
@vadirthedark check your path (plot path) there must be a mistake
-
@ccminer Checked gparted, shower path to be /dev/sdc1 so I revised path with same message. Ideas?
-
@vadirthedark when I got that message was because the path was wrong I fixed it and it worked I don't know if you can get the same message for another error
-
@ccminer Was your path and my similar?
-
@vadirthedark /media/imbota/burst
If you named your computer imbota and your external HD burst so yes it is right, else it is wrong
-
@ccminer I did name my computer 'imbota' and the drive 'burst'. If I say the path is /media/imbota/burst/ do I need to add something after burst/ for the plot file name (plots, coin, etc.)?
When I go to my Files in Ubuntu and select 'burst' drive I get a pop-up that shows /media/imbota/burst-I assume this is the path to the drive. Since my burst files are on another drive (1st HHD) does this have an affect?I read in a forum where someone had this problem and placed the burst files on the drive to plot-the problem went away.
In the Readme at the section on Generate it states:
Example usage:
./gpuPlotGenerator generate buffer /path/to/files/123456_0_50000_5000The part /path/to/files/ confuses me. It seems to say the program will be looking for 'files' in order to place info? Am I wrong?
Above you say "...., so I just command the plotter to create the plot file there". How did you do this?
Thanks for your help.
-
@vadirthedark should be like this in your case:
./gpuPlotGenerator generate buffer /media/imbota/burst/123456_0_50000_5000
(change the last numbers after "burst/" with your own wallet number id and your settings)
-
@ccminer Update - I checked drive permissions and revised them and placed a 'plots' folder on drive 'burst'.
Ran the generate again and got this:
Loading platforms...
Loading devices...
Loading devices configurations...
Initializing generation devices...
[0] Device: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (OpenCL 1.2 AMD-APP (1445.5))
[0] Device memory: 2GB 452MB
[0] CPU memory: 2GB 452MB
Initializing generation contexts...
[0] Path: /media/imbota/burst/6510305595672859587_0_19075000_68125
[0] Nonces: 0 to 19074999 (4TB 560GB 1006MB)
[0] CPU memory: 16GB 647MBDevices number: 1
Plots files number: 1
Total nonces number: 19075000
CPU memory: 19GB 75MBGenerating nonces...
0.00% (0/19075000 remaining nonces), 0.00 nonces/minutes, ETA: 36y 20w 2d 12h 40m 0s...
[ERROR][-54][CL_INVALID_WORK_GROUP_SIZE] Error in step1 kernel launchThe WGS is the size you are using for 5TB drive. Think I should reduce WGS - any ideas?
-
@vadirthedark I think you should fix the numbers in your devices.txt
-
@ccminer New #'s
0 0 512 128 8192 (devices.txt)
_0_19700000_50000 (gpu generate)It is working!! Here is one of the last lines:
0.02% (3584/19700000 remaining nonces), 926.90 nonces/minutes, ETA: 2w 0d 18h 9m
How do these #'s compare? Do you know if adjustments can be made while plotting is going on?
Thanks for all your help - could not have made it without your expert help!
-
@vadirthedark
I don't think you can adjust while plotting! But you can mine during plotting!
You are welcome!!
Other folks helped me a lot and I'm gald I could do the same for you ;)
-
@luxe I set up the plotter on Linux. I have started plotting at ~14,000 nonces per minute. I have 2 Tesla m2050. my parameters are 0_200000_20000. This is the device ID :
Id: 0
Type: GPU
Name: Tesla M2050
Vendor: NVIDIA Corporation
Version: OpenCL 1.1 CUDA
Driver version: 367.57
Max clock frequency: 1147MHz
Max compute units: 14
Global memory size: 2GB 574MB 192KB
Max memory allocation size: 655MB 560KB
Max work group size: 1024
Local memory size: 48KB
Max work-item sizes: (1024, 1024, 64)I set up the device.txt as follows : 0 0 2048 256 8192
Do you know which parameters to use to increase plotting speeds ?
-
@CoinBuster If drive write speed is the bottleneck, you could try to plot multiple drives at once. But sry i do not know what parameters best for the compute units.
-
@CoinBuster, interested in what distro you are using and plotter you used?
Thanks
-
@vadirthedark I am using ubuntu 14.04 and GPU plot generator v4.0.3 (Win/Linux)
