Jminer stops reading at 78%
-
I did recently reinstall the Burst AIO wallet and just finished plotting a drive and started plotting another. Not sure what caused this but the miner says it only reads 78% than seems nothing happens.
-
@newsense2004 if you connect a "new" drive to your computer and immediately try running Jminer it can happen, but in this case is rather a problem that the pc has not yet properly mounted the drive. Not sure if this could be your case, but it's happened to me couple of times and the whole thing freezes.
-
@vExact Thanks a reboot worked. Appreciate it.
-
@newsense2004 If i have something like that, there is always a issue with hardware involved ... not responsive USB3 drives may cause that ... ensure they do not stop spinning/shut down on long blocks.
https://forums.burst-team.us/topic/59/windows-keep-usb-drives-spinning-prevent-spindown-usb-drivesI will think about a optional trigger drives feature ... e.g. read some random data every 1 min. or something. Until now user is responsible for that while using jminer.

