Burst Blockchain DDL - Updated Regular every 24h (Zipped)
-
@gpedro It's an issue with how I'm currently doing it - every 24 hours the wallet is force closed, and the DB zipped up. Sometimes though that force close corrupts the DB and the zip - and I need to resync. Because of the forking issues we've had, I'm not going to copy another wallets DB here - it's a from scratch resync.
I'm going to change the way the wallet gets shutdown so hopefully it won't corrupt it. I will be setting up another mirror, but it won't be on the machne that run the faucets, it's already busy enough.
-
@haitch You knows the best man...
-
I too am having trouble with burst-team wallet download and installation. I have several questions:
- Where to download '.zip' in Ubuntu 14.04 - which file?
- Looking at 'Readme.txt' and it says to "...open conf/nxt-default.properties" and add ':8125' to my ip address on line "nxt.myAddress=xxx.xxx.xxx.xxx:xxxx"; where does one find the 'ip'.
I have several other questions, but this will get me started. If this discussion has been done, can someone point me in the right direction? Any help would be greatly appreciated!
Thanks again.
-
@vadirthedark The .zip gets unzipped into <your wallet dir>/burst_db
The xx.xx.xx.xx in the the example gets replaced with your address - easiest way to find it is to go to www.ipchicken.com
-
Thanks for the info haitch. But is there a perfect place for the wallet dir such as bin, root, home, etc.? I have four drives (1st HDD, 2nd HDD, an SSD and the last one just added 5TB for burst mining. I placed on 1st HDD my personal files and named one Crypto and added Burst to that. I downloaded and unzipped the wallet v1.2.6 .zip to burst.The installation suggests "we click on the scritpt "run.sh" housed in the generated folder called burst_1.2.6, ..." Then point browser to http://localhost:8125/index.html". When I run the localhost I get an Unable to connect error. I made the 'burst_1.2.6' folder for 'run.sh'. I need a little hand holding for this. Is there a step 1, step 2, step 3, etc. guide? What should be done first-second-third, tring to do all the suggestions at the same time without an ordered list is confusing.
Can you help with this?
-
@vadirthedark extract the wallet .gz to the location of your choosing. In that directory will be a run.sh - do "chmod +x run.sh", make sure that you have 64 bit Java installed - this is going to vary depending on your Linux flavor, so I won't try to post generic instructions. Under the directory where you extracted the wallet .gz to, will be a wallet_db directory - unzip the db.zip into that directory, then from <wallet dir>, run "./run.sh"
-
Hi haitch, I have done as listed above. I am getting output: "2016-10-12 11:08:08 INFO: processed block 5000". Does that look ok?
Also, should I have a wallet setup? What about 'plotting' the 5TB HDD? Should I let the terminal run - for how long?
Thanks again for your help.
-
I did get an output of: "2016-10-12 11:51:28 INFO: nxt.apiServerEnforcePOST = "true". Also, am up to 70000 on processed blocks. What is 'run.sh' doing, is it setting up wallet info?
Thanks again.
-
As 'run.sh' is working, do I need to go to '...localhost...' and make a wallet account?
-
haitch, I have an update. I let 'run.sh' work all night. It started at 11:08 and stopped at 18:06 yesterday-7 hrs. (27500 blocks). Looks like this part of the programming is not working for me. Any suggestions?
Thanks for any help you can give.
-
Sorry about all the rambling from one question to another. I did open a browser to '...localhost:8125' and got to the burst wallet sign on/create account page. Does this indicate that everything is fine and I should go on to getting an account, etc.?
Thanks
-
Update-I have added ip address and run 'run.sh. Here are the last few line of that ongoing run:
2016-10-14 08:29:05 INFO: nxt.allowedBotHosts = "127.0.0.1; localhost; [0:0:0:0:0:0:0:1];"
2016-10-14 08:29:05 INFO: nxt.enableAPIServer = "true"
2016-10-14 08:29:05 INFO: nxt.apiServerPort = "8125"
2016-10-14 08:29:05 INFO: nxt.apiServerHost = "127.0.0.1"
2016-10-14 08:29:05 INFO: nxt.apiSSL = "false"
2016-10-14 08:29:05 INFO: nxt.apiServerIdleTimeout = "30000"
2016-10-14 08:29:05 INFO: nxt.apiResourceBase = "html/ui"
2016-10-14 08:29:05 INFO: nxt.javadocResourceBase = "html/doc"
2016-10-14 08:29:05 INFO: nxt.enableAPIServerGZIPFilter = "false"
2016-10-14 08:29:05 INFO: nxt.apiServerCORS = "false"
2016-10-14 08:29:05 INFO: nxt.allowedUserHosts = "127.0.0.1; localhost; [0:0:0:0:0:0:0:1];"
2016-10-14 08:29:05 INFO: nxt.enableUIServer = "false"
2016-10-14 08:29:05 INFO: User interface server not enabled
2016-10-14 08:29:05 INFO: nxt.debugTraceQuote = """
2016-10-14 08:29:05 INFO: nxt.debugTraceSeparator = " "
2016-10-14 08:29:05 INFO: nxt.debugLogUnconfirmed = "false"
2016-10-14 08:29:05 INFO: nxt.debugTraceAccounts not defined
2016-10-14 08:29:05 INFO: nxt.debugTraceLog = "nxt-trace.csv"
2016-10-14 08:29:05 INFO: Genesis block already in database
2016-10-14 08:30:23 INFO: Last block height: 278332
2016-10-14 08:30:24 INFO: Started API server at 127.0.0.1:8125
2016-10-14 08:30:24 INFO: Started peer networking server at 0.0.0.0:8123
2016-10-14 08:30:24 INFO: Initialization took 79 seconds
2016-10-14 08:30:24 INFO: Burst server 1.2.6 started successfully.
2016-10-14 08:30:24 INFO: burst.mockMining = "false"
2016-10-14 08:39:53 INFO: processed block 280000Can anyone determine if 'run.sh' is working properly? Any help would be greatly appreciated.
Thanks
-
@vadirthedark I will give it a try on my side and let you know with updates.
-
@vadirthedark "2016-10-14 08:39:53 INFO: processed block 280000" means you're within 5,000 blocks of current - the counter only updates every 5,000 - so by now, you should be fully synced.
-
haitch - thanks for the update.
I have opened a wallet account and have PP and ID, etc. and have been following the 'Burstcoin documentattion for GNU/Linux by Kartojal' and also have 14 burstcoins. I am now trying to do plotter setup from 'Readme' file from MDCCT Plotter/.../... from 'Bitcoin Documentation by Kartojal'.Here is the first Linux section of the plotter setup instructions:
Linux
Install the build-essential and g++ packets.
Install OpenCL (available in the manufacturer SDKs).
You may have to install the opencl headers ([apt-get install opencl-headers] on Ubuntu).Modify the [PLATFORM] variable to one of [32] or [64] depending on the target platform.
Modify the [OPENCL_INCLUDE] and [OPENCL_LIB] variables of the Makefile to the correct path.
Example:OPENCL_INCLUDE = /opt/AMDAPPSDK-2.9-1/include OPENCL_LIB = /opt/AMDAPPSDK-2.9-1/lib/x86_64I have Googled this, but I am too new to Linux to understand how to set variables or what the above lines mean. Can anyone help with this?
Thanks
-
@vadirthedark you'll need to edit the Makefile file to change the values. Try nano Makefile, gedit Makefile or vi Makefile (vi is evil so hopefully you have alternatives)
-
Edited 'Makefile'. However, it was empty so I added the two 'OpenCL..' variables. I then went to my '.../plotter' dir and ./gpuPlotGenerator listPlatforms' in terminal. Getting error "Inconsistency detected by ld.so: dl-version.c: 224: _dl_check_map_versions: Assertion `needed != ((void *)0)' failed!' I would greatly appreciate if anyone can help me on this situation and how this pertains to the plotting of drive?
haitch
I have a question concerning the running of 'run.sh' and how to know when it has executed fully. I remember that it ran to 280000 and stopped. However, it did not end and come back to $. Any ideas?
Thanks for any help.
-
@vadirthedark I'd start a new thread about it - with a title about building the plotter. Will get more attention than being buried in this thread.
-
hi guys, is there a file thats more up to date than the one on db.burst-team.us whenever i use this one on my server it gets to about block 284412 and stops and gives me errors and starts blacklisting
-
@Lexicon I've updated the db.zip - see if it works for you now.

