creepMiner - C++ Burst Miner (based on Uray's Miner)
-
@Creepsky then i will try that ... thanks for the info :) appreciate it much
-
does this mining already? or is it only reading blocks?
-
@popoy17 seems good, its mining :)
wait a little and watch for lines that say that a deadline was found and confirmed.
-
@Creepsky thanks for the help i use your software in my laptop :D seems ok though that one is in my pc i just formatted it andchange it to 64bit but my laptop is a big no no your software is good in it cause lots of files i need to keep inside ahaha..
BTW is it possible that i used my pc to plot in drive and use my laptop to mine after plotting in pc is that ok? the problem only in my laptop is 32 bit and your software is good in it only that i cant plot using my laptop.
-
@popoy17 sure, you can move your plot files from one place to another. Just be careful and try to avoid duplicate nonces.
-
@Creepsky thank you so much for your help i appreciate it much :)
-
@mr.x
200mb/s is really fast, do you use a ssd for mining?? :D
But really strange that you dont get dls < 2 days. With 8 TB you should see them more than often.In the end it should not matter what miner you use (except of things like efficiency and consumption); the dls are in the plot files and should be found by all miner equally :) seems like the creepminer has a bug somewhere (--> will investigate it, maybe I find something suspicious).
If you dont want to pause your ETH mining, you could plot with a CPU plotter (like XPlotter).
-
@Creepsky said in creepMiner - C++ Burst Miner (based on Uray's Miner):
@mr.x
200mb/s is really fast, do you use a ssd for mining?? :D
But really strange that you dont get dls < 2 days. With 8 TB you should see them more than often.In the end it should not matter what miner you use (except of things like efficiency and consumption); the dls are in the plot files and should be found by all miner equally :) seems like the creepminer has a bug somewhere (--> will investigate it, maybe I find something suspicious).
If you dont want to pause your ETH mining, you could plot with a CPU plotter (like XPlotter).
14:44:47: Dir D:\Burst\plots read (1 files, 2.72 TB total) in 4.953s (~140.77 MB/s)
14:44:48: Dir E:\Burst\plots read (1 files, 2.72 TB total) in 4.968s (~140.32 MB/s)
14:44:48: Dir F:\Burst\plots read (1 files, 2.72 TB total) in 4.968s (~140.03 MB/s)
Does the tilde change the value? I honestly don't know have been driving trucks for over 35 yrs, not mining coins,lol.I'm sure the error was likely due to my wrong settings, just thought I better mention it.
Still getting the strange dls, lol. Take care
-
@Creepsky hello again i tried to use my usb stick to test if its work then it does but does it mine?
this is it mining? i just want to test it in my usb stick before gonna use my HD
-
@Creepsky i just want to report this one is this an error of idle usb stick?

-
@popoy17 it is mining but you should lower your target deadline a lot. You can find it in the config file under "mining -> targetDeadline". Otherwise you will not see deadlines for a long time :)
The error you posted is ok, it happens sometimes when the wallet is under heavy load. If you look at the green block of lines (last winner) - this data is also from the wallet, so the connection is up.
-
@Creepsky thank you so much that is why i dont see if i confirmed something or not xD
-
@Creepsky this is the output of usb stick xD too low
still plotting good amount of space just for testing purposes it really does works good
-
@popoy17 17 years deadline :D will take a while
but good to know that it is working! :)
-
@Creepsky yeah kinda looking forward too change the deadline somehow after adding more space :D
Btw does your software have 64bit? i think im gonna go with your software kinda good easy too manage :D
-
@popoy17 yep, its here: https://github.com/Creepsky/creepMiner/releases/download/2.5.2/creepMiner-win64.zip
-
@Creepsky thank you so much gonna use this too in my 64bit :D
-
@Creepsky by the way how to configure this one
"plots" : [ "C:\\Burst\\plots",i have plots in drive C ans drive D ..... i have two plots in drive C and 1 in drive D what will i add to sync in?
-
@popoy17 you just need to add the plot dirs. The miner will find all files inside it.
To add two or more plot dirs set it to"plots" : [ "C:\\Burst\\plots", "D:\\............", "E:\\............" ]
-
@Creepsky ohh i just did it while ago but im lack with , at the side that is why it came an error of sytax jason blabla xD i got panicek that is why i ask better than making a mess in the config :D
nice thanks a lot for this gonna use it later your software need to prepare for dinner and also thank you so much you did solve all my problem :D




