Plotting and Mining on Amazon Cloud Drive



  • @machasm Glad rclone is working for you, little bit of messing about to get it going but definitely the best I have found so far.

    If anything does no make sense in the Batch File just ask. It was specific to what I wanted to do rather than a generic solution.

    VPS is with worldservers.com Started with an offer from ebay

    http://www.ebay.co.uk/itm/322368512429?_trksid=p2060353.m2749.l2649&var=511299944753&ssPageName=STRK%3AMEBIDX%3AIT

    Which was £5.99 a Month, however after upping the spec to a minimum sensible spec for plotting etc it ended up at £23. I am in my second Month and will probably call a halt on uploading then and concentrate on getting Mining sorted

    Rich



  • @RichBC
    Thanks again Rich you have been a massive help
    May I ask if you have any charges for bandwidth use with your PVS service?
    If so what are they?



  • @machasm Bandwidth usage is unlimited. This was the main reason I moved away from EC2.

    Rich



  • @RichBC
    Fab
    Edit. just visited worldservers.com website and it is for sale?



  • @machasm Sorry my mistake.

    theworldservers.com

    Rich



  • @RichBC
    Do you have a link to the timere.exe file?
    I have all the other files thanks.



  • @machasm Probably other ways the time measurement could be done, but this was the first that I found that worked. handy to keep tabs on how things are going, particularly when you have left it overnight and there are multiple tries to get the files upload.

    http://www.gammadyne.com/timer.exe

    Rich



  • @RichBC
    Got the script running on my VPS.
    I have purchased a package from the same guys as you since the network charges of my ec2 instance was killing me.
    The performance of the worldservers vps is very slow compared to what I was running.
    Doesn't really matter though since it can be left running and uploading plots 24/7.
    Still, trying to fault find can take an age!
    Also, although they say you have a 1Gbps connection, the throughput is nowhere near that.
    A bit of clever advertising I think. I suspect that the hardware that they have specced is right but your virtual machine is only using a fraction of those resources (including network and CPU).
    Anyway, I will update on progress and thanks again for your help Rich.
    BTW what is your network throughput like Rich? I am beginning to think that they might have given me the wrong spec?



  • @machasm The best I see is around 35MB/s but it's quite variable. I think time of Day but have not tried to track, but as you say not as good as I would have hoped. But at least you know what it's going to cost.

    Yes took me sveral days to get things sorted, but the batch file has really helped as it just plows on regardless. What spec of system have you gone for?

    Rich



  • @RichBC
    Hi Rich.
    I went for a 8Gb Ram 450 GB drive but my network throughput right now is diabolical at around 3MB/s! Are you sure you are not talking Mbps? At my current speed it is going to take around 3-4 hours to upload 32Gb.
    I have complained and they said that they have added another core and increased RAM to 16Gb.
    I can see that they have indeed increased the RAM but the number of cores remains the same at 2.
    Also it would appear that the core frequency seems to be stuck at 1Ghz instead of the advertised 3.6Ghz.
    Can you verify how many cores and processor speed you have?

    Edit: when i was running the Ec2 instance I was uploading a 16Gb file in around 10 mins!



  • @machasm I have 6 Cores, 5GB RAM and 150GB of Hard Disk, Processor shows as a Common KVA processor 2.40GHz.

    Current speed is 29MB/s and Today it has varied between 24MB/s and 34MB/s. and yes that is Mega Bytes. Here's the log file for the last 4 sets of 3 x 25GB files.

    15-Feb-17 Start nonce 851000000 Stagger-102400 Size-6400 
    11:48:40.86 Start Plot 10 
    0:22:14.85
    12:10:55.74 Start Plot 11 
    0:22:47.46
    12:33:43.25 Start Plot 12 
    0:23:36.34
    12:57:19.66 Start Optimise 
    1:01:58.06
    13:59:17.99 Start Upload 
    0:53:31.81
     
    14:52:50.84 Start Plot 13 
    0:23:26.56
    15:16:17.45 Start Plot 14 
    0:24:13.01
    15:40:30.51 Start Plot 15 
    0:22:22.90
    16:02:53.54 Start Optimise 
    0:47:34.95
    16:50:28.70 Start Upload 
    0:41:06.79
     
    17:31:36.36 Start Plot 16 
    0:20:23.26
    17:51:59.66 Start Plot 17 
    0:19:46.36
    18:11:46.03 Start Plot 18 
    0:20:00.25
    18:31:46.39 Start Optimise 
    0:50:23.29
    19:22:09.84 Start Upload 
    0:43:19.62
     
    20:05:30.18 Start Plot 19 
    0:19:22.51
    20:24:52.70 Start Plot 20 
    0:19:50.15
    20:44:42.88 Start Plot 21 
    0:19:41.14
    21:04:24.32 Start Optimise 
    1:02:36.84
    22:07:01.23 Start Upload 
    0:48:03.62
    

    So between 41 & 53 Minutes to upload each 75GB of Plots. I did find that you needed at least 2 files being uploaded simultaneously to use the bandwidth.

    Rich



  • @RichBC Hmm The lack of cores I can live with but the uplink speed is just too slow.
    I will see if they can change the spec tomorrow.

    edit:
    How many cores show up when you bring up the task manager?
    My processor says common KVM processor 3.6Ghz. Feels like 1Ghz to me though.
    Around 2300 Nonces/min during the plot creation which is around 6X slower than my machine at home (4.5Ghz Skylake)



  • @machasm I did not think there was an option on the Uplink speed, not something I discussed. I thought all the packages were specked at 1Gbps? Feel free to refer to me if it helps. I show 6 cores in Task manager. 5352 nonces / minute

    Rich



  • @RichBC
    I have sent you a chat for PM Rich



  • @RichBC yes, the shutdown resulted from uploading and mining simultaneously. It engaged the acd most of the time. Your idea of simultaneous plotting and mining from one location sounds brilliant! I think the alarm is triggered when reading more than xx% of the time..
    I am uploading now since one week with about 50% active, 50% quiet.



  • @burster
    I had my account locked once so far but I was accessing the drive from multiple locations.
    When you had your account locked were you uploading and mining from the same machine or were you mining from a different machine?
    I am trying to work out if it is the simultaneous upload and download or if it is locked due to accessing from different IPs.



  • @machasm
    Answered my own question. Managed to get locked out again last night.
    I was uploading from one machine but then noticed I had two plots that were not optimised so I downloaded them, optimised them then uploaded them again.
    It was shortly after the downloads that my account got locked all on the same machine so single IP.
    I was careful to ensure that I was logged out of ACD from all other instances so had to be that that caused the account lock trigger.



  • @machasm So just to confirm the detail here. From what you and I have seen so far just uploading over quite long periods seems to be ok?

    However you have just been locked out when doing a simultaneous Upload & Download of presumably a few hundred GB from separate PC's but from the same IP?

    Rich



  • @RichBC
    Almost right Rich.
    It was actually from the exact same PC rather than seperate PCs.
    Everything else was as you described.
    So the safest bet seems to get all the uploading done, then once the uploading is complete start mining.
    It seems to be if you have uploaded and then downloaded in close succession.



  • @machasm OK understood. At the end of my current Month on the VPS I will try just Mining and see what happens. However I have this nasty feeling that it is the Mining that get's us locked?

    Rich


Log in to reply
 

Looks like your connection to Burst - Efficient HDD Mining was lost, please wait while we try to reconnect.