Miners need!! I Will Pay For The Reward Assignment.
-
This post is deleted!
-
@gumbogumbo Afternoon, We are averaging about 14 to 16 users currently. TB are ranging from .5 to 25tb so far that I know of. Once @Tate-A gets on I am sure he can get more specific with you. We are on of the lowest fee pools out there. We are still a fairly new pool by any means but we are coming up quick in the ranks. We have mined numerous blocks and from what I can recall have had little to no down time. The Pool runs on two different servers to insure if something happens our miners keep up and running nonstop. I would love to see you join us. And if not it great to have you in the community and happy Mining!
-
I pointed to the pool a couple minutes ago, waiting on the confirmation =D
-
@jmeek82z28 cool, happy to have you a bored. :)
-
@gumbogumbo At the time of writing this post, we have 20 miners. I would say the average for each miner it's probably about 2Tb to 6Tb. As @gecox22 said we are one of the lowest fees pools. Where about 85TB in total. We have also mind 68,677 Burst, at the time of writing this post.
-
ok in now, what limit do you want to keep the miners to, if any? I am planning on adding 3-5 TB a month to my miner, perhaps 6-10 depending if I have a good month with my day job :)
do not want to build up to 50TB then mess the rest of the pool up.
Also, how does everyone get a name instead of their burst coin address there? Being a noob I have not figured everything out yet. Just an storage freak, selling storage, for over 20 years so I decided to work with storage altcoin.
Thanks
-
This post is deleted!
-
@Terrambo I had the same reservation. I'm in for ~40TB and hoping i'm now skewing the payout too much. Certainly mining more the last 24h since I made the move from ninja, but I also mined 2 blocks for it... so that helped lol
-
@Terrambo no limit for the miners, The pool gets the name from your wallet. When you log into your wallet, on the left panel at the top. Where it shows your address, I think if you click that it'll let you set a name. :)
-
Thanks for the answers. Everything looks good so far. :) and my nme worked
-
noob question..... Can I plot more drives without stopping the mining on the other drives? Probably a bit slower I would guess but I do not know if you can do this in parallel. Common sense says that you probably can because it is two seperate processes, but I don't want to screw up my 2TB Plot by plotting a new drive and mining at the same time when I add the next 2TB
Thanks
-
@Terrambo yes you can!
-
I tried it and it keeps giving me an error, I did not jump out of the pool. I just keep gettign errors. I don't know if it was due to the upgrade to 0.3.8.1 or if it is due to me plotting right now. Anyway.... my 2 TB is at 26% right now after 3 hours, have to use my CPU to plot, am not smart enough to get the stupid GPUs working. May just put everything on my ubuntu machine and try and see how it works there tomorrow.
should be back in the pool by tomorrow evening. I pick up a new GPU just for burst mining tomorrow evening that I found on ebay from a guy that is local and gave up on mining.Perhaps there is someone here that can tell me what the following error I am getting means, could not find it in the forum:
JSON format error (offset 68) check miner.conf
Invalid value.
Press any key.....Then the terminal window just closes on me. I check the miner.conf and it seems ok to me, but like I said I am just a dumb old guy :D
Thanks
-
@Terrambo can you send me a screen shot of your config file I will take a look and see whats going on. Just sounds like something isn't in the right spot.
-
@gecox22 Sorry, don't know how to send the screen shot, so I just copy and paste. Sorry to the rest of you for the crap in the thread.
Right now D: and J: are my plots that were working, total of 2.5TB, I am currently adding another drive that is 2TB and it is plotting right now.
{
"Mode" : "pool",
"Server" : "http://pool.burstcoin.ml",
"Port" : 8020,
"SendBestOnly" : true,
"SendInterval" : 200,
"TargetDeadline": 3000000,
"UseFastRcv" : false,"UpdaterAddr" : "http://pool.burstcoin.ml",
"UpdaterPort" : 8020,
"UpdateInterval" : 2000,"ShowWinner" : true,
"InfoAddr" : "195.209.126.166",
"InfoPort" : 8080,"EnableProxy" : false,
"ProxyPort" : 8126,"Paths":
[
"D:\plots",
"J:\plots",],
"CacheSize" : 4000,
"UseSorting" : true,
"UseCleanMem" : true,
"UseBoost" : false,"Debug" : true,
"UseLog" : true,
"ShowMsg" : false,
"ShowUpdates" : false
}
-
@Terrambo lose the comma on this line: "J:\plots",
-
@Terrambo this is what it should look like but with your plots
"Paths":["C:\Burst\plots","E:\Burst\plots","F:\Burst\plots"],
"CacheSize" : 40000,
"ShowMsg" : false,
"ShowUpdates" : false,Also sent you the full config in chat. for some reason the double \ are not showing up
-
Thank you both. I copied your (@gecox22) config file, the newer one.
It now gives me the following error:
JSON format error (offset 240) check miner.conf
Invalid escape character in string.This is what the config file looks like
{
"Mode" : "pool",
"Server" : "pool.burstcoin.ml",
"Port": 8124,
"UpdaterAddr" : "pool.burstcoin.ml",
"UpdaterPort": "8124",
"InfoAddr" : "pool.burstcoin.ml",
"InfoPort": "8124",
"EnableProxy": false,
"ProxyPort": 8126,
"Paths":["J:\Burst\plots"],
"CacheSize" : 40000,
"ShowMsg" : false,
"ShowUpdates" : false,
"Debug": true,
"UseHDDWakeUp": true,
"SendBestOnly": true,
"TargetDeadline": 40000000,
"UseFastRcv" : false,
"SendInterval": 100,
"UpdateInterval": 950,
"UseLog" : true,
"ShowWinner" : false,
"UseBoost" : false,
"WinSizeX": 76,
"WinSizeY": 60
}Perhaps I should just go to bed for today, getting late here in Europe :) thanks all for the help though, I greatly appriciate it
(the Config file has the double \ after the J: but for some reason it goes away when I post the copy and paste
-
@Terrambo The forums treat the \ as an escape character so 2 \ shows up as 1, 3 \ will show up as two, like: \\
On the Paths line you need: "Paths":["J:\\Burst\\plots"],
-
thanks again for the help everyone, one more question:
Can I take my plotted drives and move them to a new system without plotting again? I want to move everything to my ubuntu system, it works much more stable and I get a GPU for plotting today.
Just want to be sure before I move 5TB and have to replot.
PS.. Still unsuccessful with the mining, keeps giving me JSON errors :( perhaps the new install on ubuntu will take care of this. All problems started after the upgrade to 0.3.8.1 so I think I will use the last version because it ran with no problems.


