burstcoin-jminer v0.4.10 - GPU assisted PoC-Miner (All Platforms)
-
@ajqjjj said:
6238401638398757545_500000001_3738944_3738944
This is not your only plotfile, guess there is another starting with 500000001 ?
If not, try:
https://forums.burst-team.us/topic/348/plotschecker
-
-
@ajqjjj sure there is no other drive with plots?
edit 'jminer.properties' with texteditor, set 'showDriveInfo=true' and 'listPlotFiles=true' or check in another way, if L:\Burst\plots is t he only folder with burst plots used by miner.
-
http://prntscr.com/c91639
this happening 5-7 times in a row best deadline 'N / A' is something wrong?
-
@trincaxt Nothing is wrong per se, you're just not finding deadlines that the pool will accept. Which pool are you mining on ?
-
-
i am using Linux what would I down load to use this miner?
-
-
burstcoin-jminer-0.4.5-RELEASE
Download:
https://github.com/de-luxe/burstcoin-jminer/releases
Info:
The miner can handle unlimited high nonce addresses now,
the Burstcoin Wallet is limited 2x Long.MAX_VALUE (18446744073709551614).
The property 'listPlotFiles=true' will also list the number of blocks mined by
a plot-file and the number of drive seeks/chunks, if a walletServer/soloServer is configured.No update needed, if you are not interested in the above.
-
hello, now is working ok on win7 ? thx
-
@alexcrys In general it is, but there is still a issue with Win7 caching using too much memory. But should be no problem on a few TB.
-
@luxe said in burstcoin-jminer v0.4.5 - GPU assisted PoC-Miner (All Platforms):
@alexcrys In general it is, but there is still a issue with Win7 caching using too much memory. But should be no problem on a few TB.
i want to put 5 hdd 3tb each(15tb) will be fine ? thx
-
@alexcrys mmm, could be difficult.... Your system specs? However win10 caching works well instead of the win7 ones...
-
@alexcrys just try, if it does not work for you, just use Blagos miner ... you should have no big cpu bottleneck with 15tb anyway.
-
@luxe said in burstcoin-jminer v0.4.5 - GPU assisted PoC-Miner (All Platforms):
@alexcrys just try, if it does not work for you, just use Blagos miner ... you should have no big cpu bottleneck with 15tb anyway.
i have amd A4-4000 will be ok ? i don't want to change os is working very well on eth+sia
-
@alexcrys It will be ok, a slow cpu could only cause you to need some seconds more to finish a round. But in most cases it does not matter if you need 30sec. or 40sec.
-
@luxe said in burstcoin-jminer v0.4.5 - GPU assisted PoC-Miner (All Platforms):
@alexcrys It will be ok, a slow cpu could only cause you to need some seconds more to finish a round. But in most cases it does not matter if you need 30sec. or 40sec.
thx.. even with more hdd ? somthing like 13 hdd (39 tb).. and how the memory ram 4-5gb is ok? thx
-
@alexcrys Guess so, but i will not promise ... Just start with your setup and add more and more capacity over time, monitor your memory/cpu usage and you will find out how much capacity you can mine on your machine ... just get started :-)
-
I have a suggestion for an improvement :
2016-09-22 09:28:41.617 INFO 18696 --- [ networkPool-1] burstcoin.jminer.JMinerCommandLine : dl '361967' confirmed! [ 4d 4h 32m 47s ]
2016-09-22 09:28:42.789 ERROR 18696 --- [ readerPool-3] b.j.c.reader.task.ReaderLoadDriveTask : IOException: The request could not be performed because of an I/O device error
2it would be super helpful if the IOException line on the console also stated what file it was, that was having problems, inclusive the drive letter and path.
Usecase is that i get this line on console, have 8 disks attached to this computer and cannot see immediatly which of the 8 disks are the source of the errors. Or maybe it's a config error i made, pointing jminer to one of the 5 non-burst disks, or even a non-existant drive letter. If i knew the filename or directory (if it is a directory search that went wrong) then it would be much easier to locate the source of the error.
-
@pinball_dude thanks for suggestion, should be no problem to add that ... will be included in next version.



