Has anyone plotted over 20TB with CPU, if so how long did it take?
-
@tylerk07 with the way GPU mining works in direct mode, it builds the plot files then fills them in - you nonces/minute will start really low, then grow as the files are filled in.
However you CPU memory is wrong - devices.txt isn't right. I forgot to check that. Private Message me a new TeamViewer ID
-
@haitch sent the login
-
@haitch said in Has anyone plotted over 20TB with CPU, if so how long did it take?:
@tylerk07 with the way GPU mining works in direct mode, it builds the plot files then fills them in - you nonces/minute will start really low, then grow as the files are filled in.
However you CPU memory is wrong - devices.txt isn't right. I forgot to check that. Private Message me a new TeamViewer ID
How do I change the CPU memory while plotting Direct? I noticed that I can change the last number in the command line for what would be the stagger normally in Buffered mode, and it increases the GPU Memory and CPU memory I get a total of 8GB which is what my card is so I left it at that. But if CPU memory is being used also I have 32GB of that. Where in Devices.txt is that setup?
-
@gpedro I took me 10 days for 5tb plotting.
-
@marinakrabov You plot even slower than me, or should i say at the same speed, because i used 2 PC's to plot at that speed xD
-
@haitch Hey man, thought Id let you know that the GPU plotter you set up failed at like 30% or so.. ive already CPU plotted another 6TB and got another 9TB. I want to start mining while it plots aswell but as soon as I go into the client and click start mining it says no found plots right after i just plotted 2 drives?
-
@tylerk07 Sorry to hear the GPU failed. Make sure the plot files are in <drive letter>:\burst\plots
-
@haitch I just checked, they both have plot files in each folder, Is it an issue that im using the same wallet that im currently using to mine on a different computer? At the bottom of the AIO client where it says 'Mining Wallet' its says my balance is 0 when its in fact not.
Any ideas on why it might now be finding my plotted drives? Also the drive letters are different on each computer.
-
@tylerk07 What CPU do you have? On my i5-2500K, 28GB Ram, 2TB HDD's.... It only takes me 16 - 18hrs to finish the plot using the official burst wallet AIO.
-
@mterrenal Its an i7 930, The plotting on both drives finished successfully. I can see them in the plot folders


